Engineering Service Channel Wiring; Alarm And Remote Control Wiring (Ts/Tc) - Alcatel 9400 UX User Manual

3.6.5.5 - - 16 x 2 Mbit/s wiring with distributor
COMMERCIAL CODE
OF DISTRIBUTOR
ASSEMBLY
9400XXI416
9400XXI416
4 x 9400XXI405
9400XXI416 9400XXI416

3.6.6 - - Engineering service channel wiring

This wiring is for connecting the user's terminal equipment to the ESC connector. For the link cable, use the
connectors supplied in the connector kit shipped with the IDU-ODU assembly. The pinout of the connectors
is given in Appendix 6.2.

3.6.7 - - Alarm and remote control wiring (TS/TC)

The TS/TC interface on:
-- the "ALARMS I/O" connector of the main IDU,
-- the "ESC3 / ALARM I/O" connector of the Light IDU versions.
is used to:
-- supply three signals (outputs) to the equipment (dry loops, 0.5 A/100 V).
-- supply (output) one remote control (dry loop, 0.5 A/100 V).
-- connect eight housekeeping alarm inputs: nº1 to nº8 alarms. These alarms are formed by normally
opened or normally closed loops, see § 7.10.
For the connecting cable, use the connector provided in the connector kits supplied with the IDU--ODU
assembly. The connector pinout is given in the Appendix 6.3.
98/314
OUTPUT
CABLE
TYPE
37-pin
connector
75 τ
1.6/5.6
2 x 3CC07885Axxx
37-pin
connector
75 τ
BNC
2 x 3CC07759Axxx
120 τ
2 x 3CC07658Axxx
120 τ
2 x 3CC07658Axxx
Issue 01 -- March 2004
2 m
2 m
2 m
2 m
DISTRIBUTOR
1U
3CC08061AAxx
1U
3CC08061ABxx
3U EMC
3CC07810AAxx
1U
3CC08062AAxx non EMC
3CC08991ATAA TQ BJA 01