Engineering Service Channels - Alcatel 9400 UX User Manual

- -
2.3

Engineering service channels

The equipment comprises:
-- in the classic IDU configuration: five engineering service channels (ESC N_1 to ESC N_5), except
in the 2 x 2 Mbit/s configuration (only three ESC).
-- in the Light IDU configuration: two engineering service channels (ESC N_1 and ESC N_3).
In the main classic IDU and in the Light IDU, the characteristics of these engineering service channels are
predefined.
The extension IDU (classic IDU version) can be used to customize ESC N_3, N_4 and N_5. This unit has a
SCU board installed with daughter boards to customize ESC N_3 and N_4.
The table below summarizes the ESC options available according to whether the configuration includes a main
IDU (classic, Light) or a classic main IDU with an extension IDU.
1+0 CONFIGURATION
ESC
WITH Light IDU
ESC N_1 Supervision
ESC N_2
ESC N_3 V11 or V28 64 kbit/s
ESC N_4
(Bit rate
> 2x2 Mbit/s)
ESC N_5
(Bit rate
> 2x2 Mbit/s)
(1) Access on main IDU.
(2) Access on main IDU if there is no extension IDU.
(3) Access on extension IDU.
38/314
1+0 BASIC CONFIGU-
RATION
WITH classic IDU
Supervision
Telephone with selective
calling
V11 or V28 64 kbit/s (2)
64 kbit/s V11 (2)
64 kbit/s V11 (2)
Issue 01 -- March 2004
OTHER CLASSIC IDU
CONFIGURATIONS
Supervision (1)
Telephone with selective calling (1)
Depending on daughter board used: (3)
S 64 kbit/s point-to-point, codirectional G.703
interface, ref.: 3CC05710AAxx
S Four-wire analogue, 600 ohms,
ref.: 3CC05711AAxx
S 64 kbit/s point-to-point, V11 or V28
ref.: 3CC05712AAxx
S Digital asynchronous (1 x 9600 bit/s or
2 x 4800 bit/s), V11 point-to-point or point-
to-multipoint (three-way coupler),
ref.: 3CC05713AAxx
S Digital asynchronous (1 x 9600 bit/s max.
or 2 x 4800 bit/s max.), V28 point-to-point
or point-to-multipoint (three-way coupler),
ref.: 3CC06482AAxx
As ESC N_ 3 (3)
64 kbit/s V11 or V28 (3)
3CC08991ATAA TQ BJA 01