Graco ROOMFOR2 Owner's Manual
Hide thumbs Also See for ROOMFOR2:

Advertisement

Quick Links

ROOMFOR2™
featuring
Graco PD314829B 4/15

Advertisement

Table of Contents
loading

Summary of Contents for Graco ROOMFOR2

  • Page 1 ROOMFOR2™ featuring Graco PD314829B 4/15...
  • Page 2 1 WARNING 2 Features ROOMFOR2™ Use Positions Parts List 3 Assembly To Open Stroller Rear Wheels Front Wheels 3-D Armbar Child’s Tray Parent’s Tray 3-G Canopy 4 Use To Secure Child To Recline Front Seat Brakes 4-D Swivel Wheels To Attach Graco® Infant...
  • Page 3 Failure to follow these warnings and the assembly instructions could result in serious injury or death. PLEASE SAVE OWNER’S USE OF THE front seat, bench MANUAL FOR FUTURE USE. seat or standing platform with a child weighing more than 50 lbs ADULT ASSEMBLY REQUIRED.
  • Page 4 • READ THE MANUAL provided with your Graco car seat before using it with your stroller. • Front tray MUST be installed over the armbar in the front location to use Classic Connect™...
  • Page 5 ROOMFOR2™ Use Positions WARNING DO NOT allow child to stand on platform facing backwards. To avoid falling, child must hold onto stroller frame.
  • Page 6: B Parts List

    2-B Parts List This model may not include some features shown below. Check that you have all the parts for this model BEFORE assembling your product. If any parts are missing, call Customer Service. No tools required. All models On certain models...
  • Page 7: To Open Stroller

    To Open Stroller Be sure to place stroller on top of a piece of cardboard or some other protective cover to prevent any damage to floor. 1. Open stroller lock. 2. Lift handle of stroller up.
  • Page 8 3. CHECK that the stroller is completely latched open every time you open the stroller and SNAP! before continuing with the rest of the assembly steps. 4. Push the platform down until it snaps into place. SNAP!
  • Page 9 5. Flip stroller upside down as shown and make sure all 3 plastic tabs are snapped around the rear axle.
  • Page 10: Rear Wheels

    Rear Wheels 1. Brake levers point toward rear of stroller. 2. Press down on brake assemblies until that snap into place. SNAP!
  • Page 11 3. Insert axle rod through axle opening. Axle key must line up with key holes. 4. Place wheel on axle.
  • Page 12 5. Push straight side of pin through axle hole. Pin will separate around the axle. Curved end of pin MUST face up as shown. 6. Snap hubcap over pin as shown. Repeat steps 4-6 (Rear Wheels) on other side. SNAP!
  • Page 13: Front Wheels

    Front Wheels 1. Attach front wheels to posts as shown. SNAP! 2. Check that wheels are securely attached by pulling on wheel assemblies.
  • Page 14 Armbar WARNING Always secure your child with the seat belt. The armbar is not a restraint device. DO NOT lift the stroller by the armbar. Use care when snapping the armbar on the stroller with a child in the stroller. 1.
  • Page 15 2. Rotate arm bar down to close. 3. Pull tab on bottom of arm bar to open.
  • Page 16 Child’s Tray WARNING Always secure your child with the seat belt. The tray is not a restraint device. DO NOT lift the stroller by the child’s tray. Use care when snapping the tray on the stroller with a child in the stroller. 1.
  • Page 17 2. To remove, press in tabs on inside of child tray and lift away from child tray bar.
  • Page 18 Parent’s Tray 1. Insert tray into slots. 2. Make sure parent tray is snapped securely onto pegs on each side of the frame.
  • Page 19 Canopy 1. Insert canopy into the canopy mounts on each side of the stroller, with the padded edge facing towards the front as shown. 2. To adjust.
  • Page 20: Point Harness

    To Secure Child WARNING Falling Hazard: Always use the seat belt. 5 Point Harness 1. To open, press button on buckle to release the waist straps. 2. To close, slide shoulder strap connectors to waist straps and insert into buckle.
  • Page 21 3. Use slide adjuster at shoulder and waist for tighter adjustment. To Use slide adjuster at shou change shoulder harness slots. waist for further adjustm Repeat on other side. Utilisez le régulateur cou à l'épaule et à la taille po ajustement plus précis.
  • Page 22 3 Point Buckle 1. To open, press button on buckle to release the waist straps. 2. Slide shoulder strap connectors off of waist straps. 3. Remove shoulder straps from stroller.
  • Page 23 4. Attach waist straps to harness buckle as shown. 5. Use slide adjuster at waist for tighter adjustment. 6. To open, press button on buckle to release the waist straps.
  • Page 24 Adjusting Shoulder Harness position Shoulder harness anchor—larger child Shoulder harness anchor—smaller child Slide adjuster 1. Use either shoulder harness anchor in the slots that are closest to child’s shoulder height. Use slide adjuster for further adjustment.
  • Page 25 To Recline Front Seat WARNING When making adjustments to the stroller seat, make sure child’s head, arms, and legs are clear of moving seat parts and stroller frame. 1. Pull up on lever to recline. 2. Pull up on lever to raise.
  • Page 26 Brakes WARNING Always apply both brakes. CHECK that brakes are on by trying to push stroller. 1. To lock brakes. SNAP! 2. To unlock brakes. SNAP!
  • Page 27: Swivel Wheels

    Swivel Wheels Front swivel wheels lock for use on uneven surfaces such as grass, stones or gravel. 1. To lock, press up. SNAP! 2. To unlock, press down. SNAP!
  • Page 28 Improper use of this product with a car seat may result in serious injury or death. Read the manual provided with your Graco car seat before using it with your product. • Always secure your child with infant car seat harness when using the car seat in the product.
  • Page 29 2. Position mounting notches over tray. Push down on car seat until the attachment latch snaps onto tray. 3. Push down on car seat until the attachment latch snaps onto tray. SNAP!
  • Page 30 4. Pull stroller waist straps through vehicle belt hook on both sides of the car seat. Check that infant car seat is securely attached by pulling up on it.
  • Page 31 5. To remove car seat: remove seat waist straps from vehicle belt hook, squeeze release handle at back of car seat, and lift car seat out of the stroller.
  • Page 32 Click Connect™ 1. (a) Adjust seat back to upright position. (b) Make sure child tray is removed from arm bar. 2. Line up latches on car seat with the the Click Connect™ mounts on stroller.
  • Page 33 3. Insert car seat into stroller and push down on car seat until the latches snap into the Click Connect™mounts. SNAP! 4. Pull stroller waist straps through vehicle belt hook on both sides of the car seat. Check that infant car seat is securely attached by pulling up on it.
  • Page 34 5. To remove car seat: remove seat waist straps from vehicle belt hook, squeeze release handle at back of car seat, and lift car seat out of the stroller.
  • Page 35: To Fold Stroller

    To Fold Stroller 1. Before folding stroller: (a) remove infant carrier if in use (b) adjust seat back to upright position (c) lock brakes (d) fold canopy SNAP!
  • Page 36 2. Rotate canopy forward. 3. (a) Press button on handle in with thumb, (b) twist handle forward and (c) fold handle toward front of stroller.
  • Page 37 4. Rotate folded canopy back over handle.
  • Page 38: Care And Maintenance

    • FROM TIME TO TIME CHECK YOUR STROLLER for loose screws, worn parts, torn material or stitching. Replace or repair the parts as needed. Use only Graco replacement parts. • EXCESSIVE EXPOSURE TO SUN OR HEAT could cause fading or warping of parts.

Table of Contents