Tripp Lite BP24V15RT2U Owner's Manual page 7

Mounting (Rack)
2-Post (Telecom) Mounting
Select external battery pack models include the hardware required for 2-post mounting.
If this hardware did not come with your unit, a 2-Post Rackmount Installation Kit (Model
2POSTRMKITWM or 2POSTRMKITHD) may be ordered separately. Refer to the
illustrations below for specific installation instructions covering 2U, 3U and 4U battery
packs.
2U
X 8
1
3U
X 8
1
4U
1 X 8
Important: Illustrations show the most typical installation configurations; your
model may vary. Use only the pre-drilled screw holes to attach mounting
brackets to the sides of the battery pack. When installing battery packs into the
rack, ensure the weight of the unit is evenly distributed.
17-05-067-9336FF.indb 7
2U
X 4
2
3U
X 4
2
4U
2
X 4
7
X 2 X 2
3
X 4
3
3 X 4
5/15/2017 2:32:00 PM
X 2