Tripp Lite BP24V15RT2U Owner's Manual page 5

Mounting (Rack)
2
Secure the shelves
and cup washers
• For 2U equipment mounting, place 4 screws total at the front and 4 screws total
at the back.
• For 3U equipment mounting, place 6 screws total at the front and 4 screws total
at the back.
Tighten all screws before proceeding.
Warning: Do not attempt to install equipment until you have inserted and
tightened the required screws. The plastic pegs will not support the weight
of your equipment.
2U
2
3U
2
17-05-067-9336FF.indb 5
B to the mounting rails permanently using the included screws
C as shown.
B
C
B
C
5
C
C
5/15/2017 2:31:52 PM