Page 7
This symbol is intended to draw special attention to certain points when handling the product. 1.3 Product information Hilti products are designed for professional use and may be operated, serviced and maintained only by trained, authorized personnel. This personnel must be informed of any particular hazards that may be encountered.
Page 8
A copy of the declaration issued by the certification department can be found at the end of this documentation. The technical documentation is filed and stored here: Hilti Entwicklungsgesellschaft mbH | Tool Certification | Hiltistrasse 6 | 86916 Kaufering, Germany 2 Safety 2.1 General power tool safety warnings WARNING Read all safety warnings and all instructions.
Page 9
▶ Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired. ▶ Disconnect the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools.
Page 10
▶ Use only the Hilti battery chargers of the C4/36 series for these batteries. 3.3 Items supplied Impact screwdriver, operating instructions. Note You can find other system products approved for your product at your local Hilti Center or online at: www.hilti.com 4 Technical data 4.1 Impact wrench Rated voltage 21.6 V...
Rated speed under no Setting III 0 Hz … 45.0 Hz load (0 /min … 2,700 /min) Impact speed ≤ 3,500 bpm Torque adjustment Three settings (additional settings are possi- ble when using the intelligent torque module SIAT22 and the torque display shows "AT") Large standard bolts M8 to M16 Large high-strength bolts...
Page 12
5.1.4 Removing the accessory tool CAUTION Risk of injury. The accessory tool may be hot or have sharp edges. ▶ Wear protective gloves when using the power tool and when changing accessory tools. 1. Set the forward/reverse switch to the middle position or remove the battery from the power tool. 2.
Page 13
To help ensure safe and reliable operation, use only genuine Hilti spare parts and consumables. Spare parts, consumables and accessories approved by Hilti for use with the product can be found at your local Hilti Center or online at: www.hilti.com...
▶ Switch the power tool off im- becomes very warm. mediately, remove the battery, keep it under observation, allow it to cool down and contact Hilti Service. The tool is overloaded (application ▶ Select a suitable power tool for limits exceeded).
Page 15
Most of the materials from which Hilti tools and appliances are manufactured can be recycled. The materials must be correctly separated before they can be recycled. In many countries, your old tools, machines or appliances can be returned to Hilti for recycling. Ask Hilti Service or your Hilti representative for further information.