Startup And Configuration; Diagnostics - progressive International Electronics Omega2 Installation Manual

O 2/O Lite Universal Site Interface
MEGA MEGA
After installing the O
MEGA
"Ready" light on the front panel should begin blinking. This can take a couple of
minutes.
To configure the unit, connect to the Ethernet, using IP address 192.168.0.250 (default)
and port number 10010 (e.g.,
User admin
Password pie.omega2
A web page will appear. Set up the O
Lite should be set for "Gilbarco" ONLY. The O
options installed. Enter the correct number of fueling positions for each channel of
dispensers.
To access O diagnostics, use either Telnet or HyperTerminal for connectivity. Set
MEGA
up a TCP/IP connection, using the configured IP address (default: 192.168.0.250) and
port 10004.
Version 1.0

Startup and Configuration

Lite or O 2, apply power. Once the unit is initialized, the
MEGA
http://192.168.0.250:10010)
, following online instructions. The O
MEGA

Diagnostics

Page 7
The login is:
2 should be set according to the
MEGA
Installation Guide
MEGA
October 2011