Table of Contents
Advertisement
O
2/O
Lite Universal Site Interface
MEGA
MEGA
POS Connection
Referring to the O
POS Port.
•
If connecting to a standard PC – Use a standard NULL-MODEM cable.
•
If connecting to a VeriFone POS system – Referring to the VeriFone
RS232 Adaptor Diagram, which follows, use an RJ45 to DB9 (male)
adaptor to connect to the VeriFone cable.
•
If connecting to other non-PC POS systems – Referring to the RS232 to
O
MEGA
outs.
Dispenser Connection
Referring to the O
appropriate DBox boards inside the O
of the O
2 is Channel 1, the next position is Channel 2, the next is Channel
MEGA
3, and the last position is the Reader Board. W hen shipped, the O
equipped with the DBox board(s) and/or Reader Board specified for the order.
Since the O
MEGA
board and the corresponding wiring diagram for that board, which follows later in
this manual. See Start-Up and Configuration in the next section of this manual
for information on logging in to the O
ATG & Price Signs
Referring to the RS232 to Omega Diagram, which follows, create a cable to
these specifications. Referring to the O
page, connect to the Auxiliary Connections Port(s). See Start-Up and
Configuration in the next section of this manual for information on logging in to
the O
2 web site to configure the ATG and/or price signs.
MEGA
Version 1.0
Connecting to the O
2 Diagram – Front View, which follows, connect to the
MEGA
Diagram, which follows, connect using the specified connector pin-
2 Diagram – Top View, on the next page, locate the
MEGA
2 can accommodate mixed brands, refer to the brand-specific
Page 5
2
MEGA
2. The position closest to the center
MEGA
2 web site to configure the dispensers.
MEGA
2 Diagram – Front View, on the next
MEGA
Installation Guide
2 is only
MEGA
October 2011
Advertisement
Table of Contents
