Rear Panels - HIKVISION DS-7204HGHI-SH Quick Start Manual


R E A R P A N E L S
No. Item
1 Video In
2 Video Out
3 Audio In
4 USB Port
5 HDMI
6 VGA
7 Audio Out
8 Network Interface
9 RS-485 Interface
10 Power Supply
11 Power Switch
12 Gnd
13 Line In
14 eSATA
15 RS-232 Interface
1
C O N N E C T D E V I C E S
1. Connect power supply cord to the DVR and plug into 110 VAC outlet (surge suppressor is
recommended).
2. Connect DVR to LAN using Cat 5e (or better) cable.
3. Connect video monitor(s) to DVR using HDMI and/or VGA cables, as appropriate.
4. Connect mouse to USB port.
5. Connect to audio I/O using RCA connectors.
Description
BNC interface for TVI and analog video input
BNC connector for spot output/video output
RCA connector
USB port for additional devices.
HDMI video output connector
DB-15 connector for VGA output. Display local video output and menu.
RCA connector
Connector for network
Connector for RS-485 devices. T+ and T- pins connect to R+ and R- pins of PTZ
receiver respectively.
D+, D- pin connects to Ta, Tb pin of controller. For cascading devices, the first
DVR's D+, D- pin should be connected with the D+, D- pin of the next DVR.
Connector for alarm input
Connector for alarm output
12 VDC power supply
Switch for turning the device on/off
Ground
BNC connector for audio input
Connects external SATA HDD, CD/DVD-RW
Connector for RS-232 devices