Table of Contents
Advertisement
A. Overwrite Mode
Select "ON" for the oldest recording data to be overwritten by new recording data.
Select "OFF" for the NVR stop writing recording data into HDD when the HDD is
full.
B. Hard Disk Full Warning
Under non-overwrite mode, click the drop down list to change value to 20%/
15%/ 10% or 5% . When the HDD space is less than the setting ratio, the buzzer
will start buzzing.
C. Auto Deletion
If select "ON" the users cannot find the recording data that is older than the
reserve day.
For example:
On 2012/10/19 17:40. The auto deletion is set as "ON". The reserve day are set as
3.
If the recording data is older than 2012/10/16 17:40 will not be indicated on the
playback menu.
D. Reserve Day
Use ◄ or ► to setup the saving days day between 1~30 days.
Note: If the "Overwrite Mode" is set OFF and the NVR keeps recording, the HDD
will finally get full regardless if "Auto Deletion" is ON.
62
Advertisement
Table of Contents
