Appendix C: Error Message List - Danbit H.264 DVR User Manual

9 channels hybrid digital video recorder
Table of Contents

Advertisement

APPENDIX C: ERROR MESSAGE LIST

ERROR MESSAGE
DISK ACCESS ERROR!
UPDATE FILE ERROR!
FIRMWARE UPGRADE
FAILED
MEDIA ACCESS FAIL!
NO FILE!
USB DEVICE NOT FOUND
NO USB
BACKUP START TIME
ERROR
BACKUPEND TIME
ERROR
ERROR STATUS & REASON
H.D.D. Data structure un-normal.
The data is not recorded into the NVR or there are bad
sectors on the NVR H.D.D. Please install another H.D.D.
and perform the recording again.
Please re-download the updated file and update again.
Please reboot the NVR and upgrade the firmware. Please
send the NVR back for repairing when the NVR is not
functional.
The USB file format is incorrect (Please format the pen
drive to FAT32) or the Pen Drive is set up to ONLY READ
mode when saving the data by using Pen Drive. Please
change the ONLY READ mode.
The data cannot be burn into the CD/DVD disc. Please
change for another CD/DVD disc and backup the file in
CD/DVD disc storage.
There is no upgrade file within the Pen Drive or the name of
upgrade file does not correspond with the NVR format.
Please adjust the upgrade file name based on the following
information.
09CH -> AdvHybrid09.bin
04CH -> AdvHybrid04.bin
Pen Drive undetected. Please Unplug the Pen Drive and
plug it again.
Backup start time error.
Backup end time error.
119

Advertisement

Table of Contents
loading

Table of Contents