Table of Contents
Advertisement
I.
PLUG & PLAY
The system will assign an IP address to the IP Cameras for getting automatic
connection. The system will check addresses from 192.168.X.0, with X being the
DVR LAN. Once the user executes the function, the IP address of the IP Camera
will be changed if it is under different LAN. The IP address will be assigned from
192.168.X.50
J.
RECORD AND PLAYBACK CONTROL
The same as the front panel controller.
K.
There little icons displayed on the top-right of the live vide of every channel. Click
to enable sound output. Click the
Please note that if those functions are not supported by the camera linked, you
will not see the corresponding icons.
The sound options do not affect the audio recorded into the video. As long as the
audio setup is enabled, the playback video will include audio even if the sound
output is turned off.
L. RECORDING STATUS
Beneath the date and time, it displays the current recording type:
SOUND INPUT/ SOUND OUTPUT / PTZ CONTROL
24
button to show the control board.
Advertisement
Table of Contents
