Table of Contents
Advertisement
3.4.
RECORD SETUP
A. Pre-Alarm Record Time / Post-Alarm Record Time
Pre-alarm record represents the recording before the alarm is triggered; the
post-alarm record means the recording after the alarm is triggered. If you set 5
sec for pre-alarm and 5 sec for post-alarm, the alarm recording length will be total
10 sec.
B. Record Mode
The record mode will be applied to all channels simultaneously. When recording,
the NVR record both main streaming and sub streaming from IP Cam. Use the
drop down list to switch the recording mode.
1. Manual: Click
2. Schedule:
a. Schedule Setup:
to start recording. Click
40
to stop recording.
Advertisement
Table of Contents
