1. Manuals
  2. Brands
  3. Protech Systems Manuals
  4. Desktop
  5. SA-5700
  6. User manual

Protech Systems SA-5700 User Manual

Desktop cpu book-sized pc
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
USER
MANUAL
SA-5700 M2
SA-5700
Desktop CPU Book-Sized PC
Powered by Intel
With 2DVI, 4COM and 2LAN
6
/7
Gen. Core
®
th
th

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SA-5700 and is the answer not in the manual?

Questions and answers

Related Manuals for Protech Systems SA-5700

Summary of Contents for Protech Systems SA-5700

  • Page 1 USER MANUAL SA-5700 Desktop CPU Book-Sized PC Powered by Intel Gen. Core ® With 2DVI, 4COM and 2LAN SA-5700 M2...
  • Page 2 SA-5700 Desktop CPU Book-Sized PC  ® with Intel Gen. Core COPYRIGHT NOTICE & TRADEMARK All trademarks and registered trademarks mentioned herein are the property of their respective owners. This manual is copyrighted in June 2017. You may not reproduce or transmit in any form or by any means, electronic, or mechanical, including photocopying and recording.
  • Page 3 FCC NOTICE This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.

  • Page 4: Table Of Contents

    Rear I/O Ports Diagram ............. 3-2 JUMPER & CONNECTOR QUICK REFERENCE TABLE ..3-2 COMPONENT LOCATIONS ............. 3-4 3.3.1 Top View and Jumper Settings of SA-5700 ....... 3-4 3.3.2 Bottom View of SA-5700 ........... 3-5 Setting Jumpers ................ 3-6 Setting Main Board Connectors and Jumpers ......3-8...
  • Page 5 3.5.1 COM1, COM2, COM4 Port Pin9 Definition Selection Guide ................... 3-8 3.5.2 COM Ports ................. 3-9 3.5.3 COM1 RS-232/422/485 Selection ........3-12 3.5.4 COM1 RS-485 Auto Flow Selection ........ 3-13 3.5.5 LAN and USB 3.0 Ports ........... 3-14 3.5.6 LAN2 Port Enable Selection ..........3-16 3.5.7 4 x 1 USB 2.0 Connectors ..........
  • Page 6 3.5.29 Clear CMOS Data Selection ..........3-37 Software Utilities ................. 4-1 Introduction ................4-2 ® Installing Intel Chipset Software Installation Utility ....4-6 4.2.1 Introduction ................ 4-6 ® 4.2.2 Intel Chipset Software Installation Utility......4-6 Intel® Management Engine Components Installer Installation . 4-7 Intel®...
  • Page 7 5.7.1 Save & Exit ................5-44 Appendix A System Diagrams ............ A-1 SA-5700 System Exploded Diagram ............A-2 SA-5700 CPU Heat Sink Exploded Diagram ..........A-4 SA-5700 SATA HDD Exploded Diagram ..........A-5 Appendix B Technical Summary ..........B-1 System Block Diagram ................B-2 Interrupt Map ....................B-3...
  • Page 8 Memory Map ...................B-23 Configuring WatchDog Timer ..............B-25 Flash BIOS Update .................B-27 List of Figures Figure 3-1. Main Board Component Location (Top View) ....3-4 Figure 3-2. Main Board Component Location (Bottom View) .... 3-5 Figure 5-1. Extensible Firmware Interface Diagram ......5-2 Figure 5-2.

  • Page 9: Revision History

    Revision History The revision history of SA-5700 User Manual is described below: Version No. Revision History Page No. Date Initial Release 2017/03/10 Revised Section 4.5 Installing RAID 2017/06/14 Driver Utility (Only for Q170, Optional). The SA-5700 System Exploded A-2 to A-3 Diagram has been revised.

  • Page 10: Introduction

    Introduction This chapter provides the introduction for the SA-5700 system as well as the framework of the user manual. The following topic is included: • About This Manual SA-5700 SERIES USER MANUAL Page: 1-1...

  • Page 11: About This Manual

    Chapter 1 Introduction 1.1 About This Manual Thank you for purchasing our SA-5700 system. The SA-5700 is an updated system designed to be comparable with the highest performance of IBM AT personal computers. The SA-5700 provides faster processing speed, greater expandability and can handle more tasks than before.

  • Page 12: Getting Started

    Getting Started This chapter provides the information for the SA-5700 system. It describes how to set up the system quickly and outlines the system specifications. The following topics are included: • Package List • System Overview • System Diagrams • System Specification •...

  • Page 13: Package List

    If you discover any of the items listed below are damaged or lost, please contact your local distributor immediately. Item Q’ty SA-5700 Manual / Driver DVD Quick Guide Mini Jumper (2 mm) AC Power Cord SA-5700 SERIES USER MANUAL Page: 2-2...

  • Page 14: System Overview

    Chapter 2 Getting Started 2.2 System Overview Unit: mm 2.2.1 Front View 2.2.2 Rear View 2.2.3 Top View SA-5700 SERIES USER MANUAL Page: 2-3...

  • Page 15: Bottom View

    Chapter 2 Getting Started 2.2.4 Bottom View 2.2.5 Side View 2.2.6 Quarter View SA-5700 SERIES USER MANUAL Page: 2-4...

  • Page 16: System Specifications

     HDD: 0°C ~ 40°C (32°F~ 104°F) Operating Temperature  -20°C ~ 80°C (-4°F~ 176°F) Storage Temperature  20%~ 90% Humidity ® Note: Intel generation CPU is NOT compatible with Win 7 / Win 8.1. SA-5700 SERIES USER MANUAL Page: 2-5...

  • Page 17: Safety Precautions

    Avoid direct sunlight exposure for a long period of time (for example, in a closed car in summer time. Also avoid the system from any heating device.). Or do not use SA-5700 when it has been left outdoors in a cold winter day. •...

  • Page 18: System Configuration

    The following topics are included: • External I/O Ports Diagram • Main Board Jumper Settings and Component Locations • How to Set Jumpers • Setting Main Board Connectors and Jumpers SA-5700 SERIES USER MANUAL Page: 3-1...

  • Page 19: External I/O Ports Diagram

    Chapter 3 Hardware Configuration 3.1 External I/O Ports Diagram 3.1.1 Rear I/O Ports Diagram SA-5700 SERIES USER MANUAL Page: 3-2...

  • Page 20: Jumper & Connector Quick Reference Table

    (Optional) Display Connector HD Audio Connector AUDIO1 (Optional) Printer Port (LPT) LPT1 Connector Front Panel Connector CPU Fan Connector CPU_FAN1 System Fan Connector SYS_FAN1 Half-Sized Mini PCI Express Slots M_PCIE1 PCI Express Slots (PCIe (x16)) PCI_E1 SA-5700 SERIES USER MANUAL Page: 3-2...
  • Page 21 SATA 3.0 Connectors SATA1, SATA2 ATX Power Input Connectors ATX_PWR1, ATX_PWR2 SPI Connector Case Open Detection Connector JP10 Low Pin Count (LPC) Connector JP12 DDR4 SO-DIMM memory socket SO-DIMM1 DDR4 SO-DIMM memory socket SO-DIMM2 SA-5700 SERIES USER MANUAL Page: 3-3...

  • Page 22: Component Locations

    Chapter 3 Hardware Configuration 3.3 COMPONENT LOCATIONS 3.3.1 Top View and Jumper Settings of SA-5700 COM1 Pin9 Voltage LAN2 Enable/Disable COM2 Pin9 Voltage COM1 RS-232/422/485 Selection Selection Selection SPI Override Selection Protection Selection Enable (default) (default) (default) Enable Disable (default)

  • Page 23: Bottom View Of Sa-5700

    Take special cares while you are holding electronic circuit boards by the edges only. Do not touch the mainboard components. 3.3.2 Bottom View of SA-5700 Figure 3-2 Main Board Component Location (Bottom View) SA-5700 SERIES USER MANUAL Page: 3-5...

  • Page 24: Setting Jumpers

    2 to create one setting and shorting. You can also select to connect pins 2 and 3 to create another setting. The format of the jumper picture will be illustrated throughout this manual. The figure below shows different types of jumpers and jumper settings. SA-5700 SERIES USER MANUAL Page: 3-6...
  • Page 25 Chapter 3 Hardware Configuration Jumper diagrams Jumper settings SA-5700 SERIES USER MANUAL Page: 3-7...

  • Page 26: Setting Main Board Connectors And Jumpers

    Jumper Location: JP_COM1 & JP_COM2 & JP_COM4 Description: COM1, COM2 and COM4 Port pin9 RI/+5V/+12V Selection JUMPER ILLUSTRATION JUMPER SELECTION SETTING JP_COM1 JP_COM2 JP_COM4 (Default Setting) JP_COM2 JP_COM4 JP_COM1 JP_COM4 JP_COM2 JP_COM1 JP_COM2 JP_COM4 JP_COM1 SA-5700 SERIES USER MANUAL Page: 3-8...

  • Page 27: Com Ports

    DTR# COM2 Note: COM2 Pin 9 is selectable for RI, +5V or +12V by jumper setting. Default setting is RI. Please see “COM1, COM2, COM4 Port Pin9 Definition Selection Guide” section for selection details. SA-5700 SERIES USER MANUAL Page: 3-9...
  • Page 28 COM4 Pin 9 is selectable for RI, +5V or +12V by jumper setting. Default setting is RI. Please see “COM1, COM2, COM4 Port Pin9 Definition Selection Guide” section for selection details. COM3(RS-232), COM4(RS-232) Connector Pin Header Pin Assignment: ASSIGNMENT ASSIGNMENT DCD# DSR# RTS# CTS# DTR# COM3/ COM4 Pin Header SA-5700 SERIES USER MANUAL Page: 3-10...
  • Page 29 (Optional) COM5(RS-232), COM6 (RS-232) Connector Pin Assignment: ASSIGNMENT ASSIGNMENT DCD# DSR# RTS# CTS# COM5/ DTR# COM6 (optional) (Optional) COM5(RS-232),COM6 (RS-232) Connector Pin Header Pin Assignment: ASSIGNMENT ASSIGNMENT DCD# DSR# RTS# CTS# DTR# COM5/ COM6 Pin Header (optional) SA-5700 SERIES USER MANUAL Page: 3-11...

  • Page 30: Com1 Rs-232/422/485 Selection

    Chapter 3 Hardware Configuration 3.5.3 COM1 RS-232/422/485 Selection Jumper Location: JP6 Description: COM1 RS-232/422/485 Selection SELECTION JUMPER SETTINGS JUMPER ILLUSTRATION Open RS-232 (Default Setting) 1-2, RS-422 3-4, 9-10 1-2, RS-485 5-6, SA-5700 SERIES USER MANUAL Page: 3-12...

  • Page 31: Com1 Rs-485 Auto Flow Selection

    Chapter 3 Hardware Configuration 3.5.4 COM1 RS-485 Auto Flow Selection Jumper Location: JP11 Description: COM1 RS-485 Auto Flow Selection SELECTION JUMPER SETTINGS JUMPER ILLUSTRATION Disable JP11 Enable (Default Setting) JP11 SA-5700 SERIES USER MANUAL Page: 3-13...

  • Page 32: Lan And Usb 3.0 Ports

    No LAN switch/hub connected Right Side LED LAN1_USB1 Yellow Color Blinking LAN Message Active No LAN Message Active USB 3.0 signals: ASSIGNMENT ASSIGNMENT VCC5 VCC5 USBP1N USBP2N USBP1P USBP2P RX1_DN RX2_DN RX1_DP RX2_DP TX1_DN TX2_DN TX1_DP TX2_DP SA-5700 SERIES USER MANUAL Page: 3-14...
  • Page 33 No LAN switch/hub connected Right Side LED Yellow Color Blinking LAN Message Active No LAN Message Active LAN2_USB2/ USB 3.0 signals: ASSIGNMENT ASSIGNMENT VCC5 VCC5 USBP3N USBP4N USBP3P USBP4P RX3_DN RX4_DN RX3_DP RX4_DP TX3_DN TX4_DN TX3_DP TX4_DP SA-5700 SERIES USER MANUAL Page: 3-15...

  • Page 34: Lan2 Port Enable Selection

    Chapter 3 Hardware Configuration 3.5.6 LAN2 Port Enable Selection Jumper Location: JP_LAN2 Description: LAN2 Port Enable Selection SELECTION JUMPER SETTINGS JUMPER ILLUSTRATION Enable (Default Setting) JP_LAN2 Disable JP_LAN2 SA-5700 SERIES USER MANUAL Page: 3-16...

  • Page 35: X 1 Usb 2.0 Connectors

    4 x 1 USB 2.0 Connectors Port Name: USB1 (rear I/O) Description: USB 2.0 Connectors x 4 USB1 USB 2.0 signals: ASSIGNMENT ASSIGNMENT ASSIGNMENT ASSIGNMENT USB2_P5_DP_L USB2_P5_DN_L VCC5 USB2_P6_DP_L USB2_P6_DN_L VCC5 USB2_P7_DP_L USB2_P7_DN_L VCC5 USB2_P8_DP_L USB2_P8_DN_L VCC5 SA-5700 SERIES USER MANUAL Page: 3-17...

  • Page 36: Internal Usb 2.0 Connector

    Chapter 3 Hardware Configuration 3.5.8 Internal USB 2.0 Connector Connector Location: USB2 Description: Internal USB 2.0 Connector USB 2.0 connector signals: ASSIGNMENT VCC5 USB2_P9_DN_L USB2_P9_DP_L USB2 SA-5700 SERIES USER MANUAL Page: 3-18...

  • Page 37: Dual Dvi-D Ports

    Connectors (Supports only DVI-D signals) DVI1 DVI1 connector signals (A): ASSIGNMENT ASSIGNMENT DP_Data2- DP_Data2+ +5V Power Ground Ground HOT Plug Detect DP_Data0- DP_Ctrl_Clock DP_Data0+ DP_Ctrl_ Data Ground CRT_VSYNC DP_Data1- DP_Data1+ Ground Ground DP_Clock+ DP_Clock- SA-5700 SERIES USER MANUAL Page: 3-19...
  • Page 38 Chapter 3 Hardware Configuration DVI1 connector signals (B): ASSIGNMENT ASSIGNMENT DP_Data2- DP_Data2+ +5V Power Ground Ground HOT Plug Detect DP_Data0- DP_Ctrl_Clock DP_Data0+ DP_Ctrl_ Data Ground CRT_VSYNC DP_Data1- DP_Data1+ Ground Ground DP_Clock+ DP_Clock- SA-5700 SERIES USER MANUAL Page: 3-20...

  • Page 39: Displayport Connector (Optional)

    Chapter 3 Hardware Configuration 3.5.10 DisplayPort Connector (Optional) Connector Location: DP1 Description: DisplayPort Connector DP1 (optional) ASSIGNMENT ASSIGNMENT DP_C_DATA0+ DP_C_DATA0- DP_C_DATA1+ DP_C_DATA1- DP_C_DATA2+ DP_C_DATA2- DP_C_DATA3+ DP_C_DATA3- DP_C_AUX_ENJ DP_C_AUX+ DP_C_HPD DP_C_AUX- DP_VCC3_3 DP_VCC5 DP_VCC3_3 SA-5700 SERIES USER MANUAL Page: 3-21...

  • Page 40: Hd Audio Connector

    Chapter 3 Hardware Configuration 3.5.11 HD Audio Connector Connector Location: AUDIO1 Description: HD Audio Connector for Line_in/Line_out/Mic_in. Line-in: ASSIGNMENT HD_LINE-IN-L HD_LINE-IN-R Line-out: ASSIGNMENT LINE-OUT-L LINE-OUT-R Mic-in: AUDIO1 ASSIGNMENT HD_MIC1-L_L HD_MIC1-R_L SA-5700 SERIES USER MANUAL Page: 3-22...

  • Page 41: Printer Port Connector (Optional)

    Chapter 3 Hardware Configuration 3.5.12 Printer Port Connector (Optional) Connector Location: LPT1 Description: Printer Port Connector LPT1 (optional) Printer Port (LPT1) signals: ASSIGNMENT ASSIGNMENT STRB# ERR# INIT SLIN ACK# BUSY SLCT SA-5700 SERIES USER MANUAL Page: 3-23...

  • Page 42: Front Panel Connector

    Chapter 3 Hardware Configuration 3.5.13 Front Panel Connector Port Name: FP1 Description: Front Panel Connector ASSIGNMENT ASSIGNMENT HDD+ PWR+ HDD- PWR- Power Button Reset Button SA-5700 SERIES USER MANUAL Page: 3-24...

  • Page 43: Cpu Fan Connector

    2. Default BIOS setting is “Auto Duty-Cycle Mode”. Please see Chapter 5 for more details. 3.5.15 System Fan Connector Connector Location: SYS_FAN1 Description: System Fan Connector System Fan Connector (SYS_FAN1) signals: ASSIGNMENT VCC12 SYS_FAN1 SA-5700 SERIES USER MANUAL Page: 3-25...

  • Page 44: Half-Sized Mini Pci Express Slots

    Mini PCI Express is the successor of the Mini PCI card and provides an increased data throughput. The cards have a detached network interface and are equipped with one lane. They are used in particular in embedded designs or compact box PCs. SA-5700 SERIES USER MANUAL Page: 3-26...

  • Page 45: Pci Express Slots

    HSIN2 HSON3 HSIP3 RSVD PRSNT#2 HSIN3 HSOP4 RSVD RSVD HSON4 HSIP4 HSOP5 HSIN4 HSON5 HSIP5 HSOP6 HSIN5 HSON6 HSIP6 HSOP7 HSIN6 HSON7 HSIP7 PRSNT#2 HSIN7 HSOP8 HSON8 RSVD HSIP8 HSIN8 HSOP9 HSON9 HSIP9 HSIN9 SA-5700 SERIES USER MANUAL Page: 3-27...

  • Page 46: Chapter 3 Hardware Configuration

    Chapter 3 Hardware Configuration ASSIGNMENT ASSIGNMENT ASSIGNMENT ASSIGNMENT HSOP10 HSON10 HSIP10 HSIN10 HSOP11 HSON11 HSIP11 HSIN11 HSOP12 HSON12 HSIP12 HSIN12 HSOP13 HSON13 HSIP13 HSIN13 HSOP14 HSIN14 HSIP14 HSIN14 HSIP15 HSIN15 PRSNT#2 HSIP15 HSIN15 RSVD SA-5700 SERIES USER MANUAL Page: 3-28...

  • Page 47: Sata 3.0 Connectors

    Description: Serial ATA (SATA) 6GB/s Connector SATA1 Serial ATA 6GB/s Connector (SATA1) signals: ASSIGNMENT TXPC TXNC RXNC RXPC Connector Location: SATA2 Description: Serial ATA (SATA) 6GB/s Connector SATA2 Serial ATA 6GB/s Connector (SATA2) signals: ASSIGNMENT TXPC TXNC RXNC RXPC SA-5700 SERIES USER MANUAL Page: 3-29...

  • Page 48: Atx Power Connectors

    ATX_PWR1 ATX Power Connector signals: ASSIGNMENT ASSIGNMENT +3.3V +3.3V +3.3V PSON PWROK 5VSB +12V +12V +3.3V ATX_PWR1 Connector Location: ATX_PWR2 Description: DC Power Input Connector ATX_PWR2 DC Power Input Connector signals: ASSIGNMENT ASSIGNMENT +12V +12V ATX_PWR2 SA-5700 SERIES USER MANUAL Page: 3-30...

  • Page 49: At / Atx Mode Selection

    Jumper Location: JP2 Description: AT / ATX Mode Selection SELECTION JUMPTER SETTING JUMPER ILLUSTRATION (Default Setting) Jumper Location: JP3 Description: AT / ATX Mode Selection SELECTION JUMPTER SETTING JUMPER ILLUSTRATION Close Open (Default Setting) SA-5700 SERIES USER MANUAL Page: 3-31...

  • Page 50: Spi Connector

    Description: SPI (Serial Peripheral Interface Bus) Connector ASSIGNMENT ASSIGNMENT 3.3V MISO MOSI 3.5.22 SPI Override Protection Selection Jumper Location: JP9 Description: SPI Override Protection Selection SELECTION JUMPER SETTING JUMPER ILLUSTRATION Open Enable (Default Setting) Disable Close SA-5700 SERIES USER MANUAL Page: 3-32...

  • Page 51: Case Open Detection Connector

    Connector Location: JP10 Description: Case Open Detection Connector ASSIGNMENT Caseopen+ Caseopen- JP10 3.5.24 Intruder Detection Selection Jumper Location: JP4 Description: Intruder Detection Selection SELECTION JUMPER SETTING JUMPER ILLUSTRATION Close Enable (Default Setting) Disable Open SA-5700 SERIES USER MANUAL Page: 3-33...

  • Page 52: Low Pin Count (Lpc) Connector

    LPC_AD0 LPC_AD3 LPC_AD2 3.3V LPC_AD1 JP12 3.5.26 Clear RTC Data Selection Jumper Location: JRTC1 Description: Clear RTC Data Selection SELECTION JUMPER SETTINGS JUMPER ILLUSTRATION Open Normal (Default Setting) JRTC1 Clear RTC Close Data JRTC1 SA-5700 SERIES USER MANUAL Page: 3-34...

  • Page 53: Vccio Voltage Selection

    Chapter 3 Hardware Configuration 3.5.27 VCCIO Voltage Selection Jumper Location: JP1 Description: VCCIO Voltage Selection SELECTION JUMPER SETTING JUMPER ILLUSTRATION 0.95V (Default Setting) 1.0V SA-5700 SERIES USER MANUAL Page: 3-35...

  • Page 54: Bios Recovery Mode Selection

    Chapter 3 Hardware Configuration 3.5.28 BIOS Recovery Mode Selection Jumper Location: JP5 Description: BIOS Recovery Mode Selection SELECTION JUMPER SETTING JUMPER ILLUSTRATION Normal (Default Setting) Configure Recovery Open SA-5700 SERIES USER MANUAL Page: 3-36...

  • Page 55: Clear Cmos Data Selection

    Step 4. Power on the PC and the PC will then auto-reboot for once in order to set SoC’s register. Step 5. Done! SELECTION JUMPER SETTINGS JUMPER ILLUSTRATION Open Normal (Default Setting) JCMOS1 Clear CMOS Close Data JCMOS1 Note: Please make sure the main power is off before you clear CMOS. SA-5700 SERIES USER MANUAL Page: 3-37...

  • Page 56: Software Utilities

    • Installing Intel ® Management Engine Components Installer • Installing USB 3.0 eXtensible Host Controller Utility • Installing RAID Driver Utility (Only for Q170, Optional) • Installing Graphics Driver Utility • Installing LAN Driver Utility • Installing Sound Driver Utility SA-5700 SERIES USER MANUAL Page: 4-1...

  • Page 57: Introduction

    Chapter 4 Software Utilities 4.1 Introduction Enclosed with the SA-5700 Series package is our driver utilities contained in a DVD-ROM disk. Refer to the following table for driver locations: Filename (Assume that DVD- Purpose ROM drive is D :) DOS Win7 Win8.1 Win10 ...
  • Page 58  Codec \Win7(32-bit) Audio System Software D:\Q170\Driver\Platform\KMDF Kernel-Mode Driver  \Win7(32-bit) Framework D:\Q170\Driver\Platform\ Intel(R) USB 3.0 eXtensible    USB3.0\Win7(32-bit) Host Controller D:\Q170\Driver\Platform\RAID Intel(R) Rapid Storage    \Win7(32-bit) Technology (Intel(R) RST). SA-5700 SERIES USER MANUAL Page: 4-3...
  • Page 59 Win8.1(64-bit) installer D:\Q170\Driver\Platform\RAID Intel(R) Rapid Storage    \Win8.1(64-bit) Technology (Intel(R) RST). D:\Q170\Driver\Platform\Main Intel® Chipset Device    Chip \Win10(64-bit) Software installer D:\Q170\Driver\Platform\ Intel(R) HD Graphics    Graphic \Win10(64-bit) installer Page: 4-4 SA-5700 SERIES USER MANUAL...
  • Page 60  Engine Components Win10(64-bit) installer D:\Q170\Driver\Platform\RAIDs Intel(R) Rapid Storage    \Win10(64-bit) Technology (Intel(R) RST). X : Not support : Support Note: Install the driver utilities immediately after the OS installation is completed. SA-5700 SERIES USER MANUAL Page: 4-5...

  • Page 61: Installing Intel Chipset Software Installation Utility

    OS installation is finished. Please follow the steps below: Connect the USB DVD-ROM device to SA-5700 and insert the driver disk. Enter the Main Chip folder where the Chipset driver is located.

  • Page 62: Intel® Management Engine Components Installer Installation

    ® Installation Instructions for Intel Management Engine Components Installer Connect the USB DVD-ROM device to SA-5700 and insert the driver disk. Enter the ME Installation Driver folder where the driver is located. Select Windows 7 (32/64-bit) / Windows 8.1 (64-bit) / Windows 10 (64-bit) for your OS platform.

  • Page 63: Intel® Usb 3.0 Extensible Host Controller Utility

    Chapter 4 Software Utilities Follow the on-screen instructions to complete the installation. Once the installation is completed, shut down the system and restart SA-5700 for the changes to take effect. 4.4 Intel® USB 3.0 eXtensible Host Controller Utility ® Intel USB 3.0 eXtensible Host Controller Driver supports the...
  • Page 64 Ctrl-I when prompted during the Power-On Self-Test (POST). Option ROM prompt: In the user interface, the hard drive(s) and hard drive information listed for your system will differ from the example in the figure below: Option ROM user interface: SA-5700 SERIES USER MANUAL Page: 4-9...

  • Page 65: Installing Raid Driver Utility (Only For Q170, Optional)

    RAID 0, 1 in Q170 SKU only for 2 x 2.5” SATAIII HDD/SSD. To install the RAID driver utility, follow the steps below: Connect the USB DVD-ROM device to SA-5700 and insert the driver disk. Enter the RST folder where the driver is located.

  • Page 66: Installing Graphics Driver Utility

    Chapter 4 Software Utilities 4.6 Installing Graphics Driver Utility The graphics interface embedded in SA-5700 can support a wide range of display types. You can have dual displays via DVI-D ports and make the system work simultaneously. To install the Graphics driver utility, follow the steps below: Connect the USB DVD-ROM device to SA-5700 and insert the driver disk.

  • Page 67: Installing Lan Driver Utility

    4.7 Installing LAN Driver Utility Enhanced with LAN function, SA-5700 supports various network adapters. To install the LAN Driver, follow the steps below: Connect the USB DVD-ROM device to SA-5700 and insert the driver disk. Enter the LAN folder where the driver is located.

  • Page 68: Installing Sound Driver Utility

    Windows 7/8.1/10 series. To install the Sound Driver, follow the steps below: Connect the USB DVD-ROM device to SA-5700 and insert the driver disk. Open the Sound folder where the driver is located. Select Windows 7 (32/64-bit) / Windows 8.1 (64-bit) / Windows 10 (64-bit) for your OS platform.

  • Page 69: Bios Setup

    The BIOS Setup Utilities consist of the following menu items: • Accessing Setup Utilities • Main Menu • Advanced Menu • Chipset Menu • Security Menu • Boot Menu • Save & Exit Menu SA-5700 SERIES USER MANUAL Page: 5-1...

  • Page 70: Introduction

    Chapter 5 BIOS Setup 5.1 Introduction The SA-5700 System uses an AMI (American Megatrends Incorporated) Aptio BIOS that is stored in the Serial Peripheral Interface Flash Memory (SPI Flash) and can be updated. The SPI Flash contains the built-in BIOS setup program, Power-On Self-Test (POST), PCI auto-configuration utility, LAN EEPROM information, and Plug and Play support.

  • Page 71: Accessing Setup Utility

    All the menu settings are described in details in this chapter. 5.2 Accessing Setup Utility After the system is powered on, BIOS will enter the Power-On Self-Test (POST) routines and the POST message will be displayed: SA-5700 SERIES USER MANUAL Page: 5-3...

  • Page 72: Figure 5-2. Post Screen With Ami Logo

    Chapter 5 BIOS Setup Figure 5-2. POST Screen with AMI Logo Press <Del> or <Esc> to access the Setup Utility program and the Main menu of the Aptio Setup Utility will appear on the screen as below: SA-5700 SERIES USER MANUAL Page: 5-4...
  • Page 73 US English. You may use <↑> or <↓> key to select among the items and press <Enter> to confirm and enter the sub-menu. The following table provides the list of the navigation keys that you can use while operating the BIOS setup menu. SA-5700 SERIES USER MANUAL Page: 5-5...
  • Page 74 The CMOS battery The battery may be losing power and users is bad or has been should replace the battery immediately. Also, recently replaced. this message is displayed once the new battery is replaced. SA-5700 SERIES USER MANUAL Page: 5-6...

  • Page 75: Main

    Build Date and No changeable options Displays the date of current BIOS version. Time System Date Month, day, year Sets the system date. The format is [Day Month/ Date/ Year]. Users can directly SA-5700 SERIES USER MANUAL Page: 5-7...
  • Page 76 The “Day” is automatically changed. System Time Hour, minute, second Sets the system time. The format is [Hour: Minute: Second]. Users can directly enter values or use <+> or <-> arrow keys to increase/decrease it. SA-5700 SERIES USER MANUAL Page: 5-8...

  • Page 77: Advanced

    F81866 Super IO System Super IO Chip Parameters. Sub-Menu Configuration Hardware Monitor Sub-Menu Monitor hardware status. F81866 Watchdog Sub-Menu F81866 Watchdog Parameters. Network Stack Network Stack Settings. Sub-Menu Configuration USB Configuration Sub-Menu USB Configuration Parameters. SA-5700 SERIES USER MANUAL Page: 5-9...

  • Page 78: Advanced - Cpu Configuration

    No changeable options Displays L4 Cache size. No changeable options Supports Intel VMX Technology. SMX/TXT No changeable options Reports if Intel Secure Mode Extensions Technology (SMX) /Trusted Execution Technology (TXT) is supported by the processor. SA-5700 SERIES USER MANUAL Page: 5-10...
  • Page 79 PC microprocessor. For each processor core that is physically present, the operating system addresses two virtual processors, and shares the workload between them when possible. SA-5700 SERIES USER MANUAL Page: 5-11...

  • Page 80: Advanced - Sata Configuration

    Port 1 - 2 - Disabled Enables or Disables SATA Port Device. - Enabled Hot Plug - Disabled Enables or Disables SATA Port Device - Enabled Hot Plug function to designate a SATA port device as hot-pluggable. SA-5700 SERIES USER MANUAL Page: 5-12...

  • Page 81: Advanced - Pch-Fw Configuration

    Description/Purpose ME Firmware No changeable options Displays the ME Firmware Version. Version ME Firmware Mode No changeable options Displays the ME Firmware Mode. ME Firmware SKU No changeable options Displays the ME Firmware SKU. SA-5700 SERIES USER MANUAL Page: 5-13...

  • Page 82: Advanced - Acpi Settings

    SUSPEND button is pressed. Lock Legacy - Disabled Enables or Disables Lock of Legacy Resources - Enabled Resources. - Disabled Enables or Disables S3 Video Repost. S3 Video Repost - Enabled SA-5700 SERIES USER MANUAL Page: 5-14...

  • Page 83: Advanced - F81866 Super Io Configuration

    Sets the parameters of Serial Port 5 Serial Port 5 Configuration Sub-menu (COME). Sets the parameters of Serial Port 6 Serial Port 6 Configuration Sub-menu (COMF). Parallel Port Sub-menu Sets the parameters of Parallel Port (LPT). SA-5700 SERIES USER MANUAL Page: 5-15...
  • Page 84 Serial Port 1. Change Settings - Auto Allows you to select specific - IO=3F8h; IRQ=4; IO address and IRQ for Serial - IO=3F8h; IRQ=3,4,5,6,7,10,11; Port 1. - IO=2F8h; IRQ=3,4,5,6,7,10,11; - IO=3E8h; IRQ=3,4,5,6,7,10,11; - IO=2E8h; IRQ=3,4,5,6,7,10,11; SA-5700 SERIES USER MANUAL Page: 5-16...
  • Page 85 Serial Port 2. Change Settings - Auto Allows you to select specific - IO=2F8h; IRQ=3; IO address and IRQ for Serial - IO=3F8h; IRQ=3,4,5,6,7,10,11; Port 2. - IO=2F8h; IRQ=3,4,5,6,7,10,11; - IO=3E8h; IRQ=3,4,5,6,7,10,11; - IO=2E8h; IRQ=3,4,5,6,7,10,11; SA-5700 SERIES USER MANUAL Page: 5-17...
  • Page 86 Serial Port 3. Change Settings - Auto Allows you to select specific - IO=3E8h; IRQ=7; IO address and IRQ for Serial - IO=3E8h; IRQ=3,4,5,6,7,10,11; Port 3. - IO=2E8h; IRQ=3,4,5,6,7,10,11; - IO=2F0h; IRQ=3,4,5,6,7,10,11; - IO=2E0h; IRQ=3,4,5,6,7,10,11; SA-5700 SERIES USER MANUAL Page: 5-18...
  • Page 87 Serial Port 4. Change Settings - Auto Allows you to select specific - IO=2E8h; IRQ=10; IO address and IRQ for Serial - IO=3E8h; IRQ=3,4,5,6,7,10,11; Port 4. - IO=2E8h; IRQ=3,4,5,6,7,10,11; - IO=2F0h; IRQ=3,4,5,6,7,10,11; - IO=2E0h; IRQ=3,4,5,6,7,10,11; SA-5700 SERIES USER MANUAL Page: 5-19...
  • Page 88 Serial Port 5. Change Settings - Auto Allows you to select specific - IO=2F0h; IRQ=6; IO address and IRQ for Serial - IO=3E8h; IRQ=3,4,5,6,7,10,11; Port 5. - IO=2E8h; IRQ=3,4,5,6,7,10,11; - IO=2F0h; IRQ=3,4,5,6,7,10,11; - IO=2E0h; IRQ=3,4,5,6,7,10,11; SA-5700 SERIES USER MANUAL Page: 5-20...
  • Page 89 Serial Port 6. Change Settings - Auto Allows you to select specific - IO=2E0h; IRQ=11; IO address and IRQ for Serial - IO=3E8h; IRQ=3,4,5,6,7,10,11; Port 6. - IO=2E8h; IRQ=3,4,5,6,7,10,11; - IO=2F0h; IRQ=3,4,5,6,7,10,11; - IO=2E0h; IRQ=3,4,5,6,7,10,11; SA-5700 SERIES USER MANUAL Page: 5-21...
  • Page 90 DMA resource. - EPP-1.7 and SPP Mode After Mode is changed, reset - ECP Mode the system to reflect actual - ECP and EPP 1.9 Mode device settings. - ECP and EPP 1.7 Mode SA-5700 SERIES USER MANUAL Page: 5-22...

  • Page 91: Advanced - Hardware Monitor

    No changeable options the VCC5V in supply. Detects and displays voltage level of VCC12 No changeable options the VCC12 in supply. Detects and displays voltage level of VCC3V No changeable options the VCC3V in supply. SA-5700 SERIES USER MANUAL Page: 5-23...

  • Page 92: Advanced - Hardware Monitor - Smart Fan Mode

    Smart Fan Mode selection for CPU Control - Auto Duty-Cycle Mode Fan. Manual Duty Mode Numeric (from 1 to 100) Manual mode fan control. Users can write expected duty cycle from 1-100 (PWM fan type). SA-5700 SERIES USER MANUAL Page: 5-24...

  • Page 93: Advanced - F81866 Watchdog Configuration

    Selects 1s (second) or 60s (minute) as Watchdog timer unit - 60s the time unit of Watchdog timer. Count for Timer Numeric Sets the timeout for Watchdog timer. (Seconds) (from 1 to 255) (Max. value: 255 seconds or minutes) SA-5700 SERIES USER MANUAL Page: 5-25...

  • Page 94: Advanced - Network Stack Configuration

    - Enabled disabled, IPv4 PXE boot option will not Support be created. Ipv6 PXE - Disabled Enables IPv6 PXE Boot Support. If Support - Enabled disabled, IPv6 PXE boot option will not be created. SA-5700 SERIES USER MANUAL Page: 5-26...

  • Page 95: Advanced - Usb Configuration

    The USB Configuration allows users to enable/disable USB mass storage driver support. USB Configuration Screen BIOS Setting Options Description/Purpose USB Mass Storage Driver - Enabled Enables or Disables USB mass storage Support - Disabled driver support. SA-5700 SERIES USER MANUAL Page: 5-27...

  • Page 96: Chipset

    This menu allows users to configure advanced Chipset settings such as System Agent (SA) and PCH-IO configuration parameters. Chipset Screen BIOS Setting Options Description/Purpose System Agent (SA) Sub-menu System Agent (SA) parameters. Configuration PCH-IO Configuration Sub-menu PCH parameters. SA-5700 SERIES USER MANUAL Page: 5-28...

  • Page 97: Chipset - System Agent (Sa) Configuration

    I/O devices in virtualized environment. Memory Sub-menu Displays the DRAM information on the Configuration platform. Graphics Sub-menu Configures Graphics Settings. Configuration SA-5700 SERIES USER MANUAL Page: 5-29...

  • Page 98: Chipset - Sa Configuration - Memory Configuration

    No changeable options Displays the Frequency of Memory. Memory Timings No changeable options Displays the Memory (RAM) timings (tCL-tRCD-tRP-tRAS) and latency. • CAS Latency (tCL) - This is the most important memory timing. CAS stands SA-5700 SERIES USER MANUAL Page: 5-30...
  • Page 99 (tRAS = tCL + tRCD + tRP). Displays if SO-DIMM#1 socket is SO-DIMM#1 No changeable options populated/enabled or not. Displays if SO-DIMM#2 socket is SO-DIMM#2 No changeable options populated/enabled or not. Size No changeable options Displays the total memory size. SA-5700 SERIES USER MANUAL Page: 5-31...

  • Page 100: Chipset - System Agent (Sa) Configuration - Graphics

    Chipset > System Agent (SA) Configuration > Graphics Configuration Graphics Configuration Screen BIOS Setting Options Description/Purpose - Auto Select which of IGFX/PEG Graphics Primary Display - IGFX device should be Primary Display. - PEG LCD Control Sub-menu LCD Control sub-menu. SA-5700 SERIES USER MANUAL Page: 5-32...
  • Page 101 - VBIOS default Selects Primary Display Device. Boot Display - DVI-D 1 - DVI-D 2 - DisplayPort Secondary IGFX - Disabled Selects Secondary Display Device. Boot Display - DVI-D 1 - DVI-D 2 - DisplayPort SA-5700 SERIES USER MANUAL Page: 5-33...

  • Page 102: Chipset -System Agent (Sa) Configuration - Peg Port

    Enables or Disables the Root Port. - Enabled - Auto Max Link Speed - Auto Configures PCI-E1 maximum speed. - Gen1 - Gen2 - Gen3 Detect - Disabled Detects Non-Compliance PCI Express Non-Compliance - Enabled Device in PEG. Device SA-5700 SERIES USER MANUAL Page: 5-34...

  • Page 103: Configuration

    Default: Enabled. State After G3 - Power On Specifies the Power On/Off state that the - Power Off system will go into when the power is re-applied following a power failure (G3 state). SA-5700 SERIES USER MANUAL Page: 5-35...

  • Page 104: Chipset - Pch-Io Configuration - Pci Express

    PCI Express Configuration Screen BIOS Setting Options Description/Purpose PCIE Port No changeable options Displays the LAN assigned PCIE Port. assigned to LAN Mini PCI Express Configures Mini PCI Express Port Sub-menu Port settings. SA-5700 SERIES USER MANUAL Page: 5-36...

  • Page 105: Configuration

    PCI Express L1 Substates settings. - L1.1 - L1.2 - L1.1 & L1.2 Hot Plug - Disabled Enables or Disables PCI Express Hot - Enabled Plug. PCIe Speed - Auto Selects PCI Express Port Speed. - Gen1 SA-5700 SERIES USER MANUAL Page: 5-37...

  • Page 106: Security

    An administrator has much more privileges over the settings in the Setup utility than a user. Heed that a user password does not provide access to most of the features in the Setup utility. Security Screen SA-5700 SERIES USER MANUAL Page: 5-38...
  • Page 107 2. Select the configured Administrator Password or User Password that you want to delete. Leave the dialog box blank and press <Enter>. 3. Press <Enter> again when the password confirmation box appears. SA-5700 SERIES USER MANUAL Page: 5-39...

  • Page 108: Boot

    Selects the NumLock sate after the system NumLock State - Off is powered on. • On: Enables the NumLock function automatically after the system is powered on. • Off: Disables the NumLock function after the system is powered on. SA-5700 SERIES USER MANUAL Page: 5-40...
  • Page 109 Note that in the menu displayed, you will only see the device with the highest priority for a specific boot device type. Sub-Menu CSM configuration: Enable/Disable, Configuration Option ROM execution settings, etc. SA-5700 SERIES USER MANUAL Page: 5-41...

  • Page 110: Boot - Csm Configuration

    - UEFI and Legacy This option controls Legacy/UEFI ROMs - Legacy only priority. - UEFI only Network - Do not launch Controls the execution of UEFI and - UEFI Legacy PXE OpROM. - Legacy SA-5700 SERIES USER MANUAL Page: 5-42...
  • Page 111 Controls the execution of UEFI and - UEFI Legacy Video OpROM. - Legacy Other PCI - Do not launch Determines OpROM execution policy for devices - UEFI devices other than Network, Storage or - Legacy Video. SA-5700 SERIES USER MANUAL Page: 5-43...

  • Page 112: Save & Exit

    Discard Changes and Reset to discard any changes you have made and restore the factory BIOS defaults. Load User Defaults You may simply press F3 at any time to load the Optimized Values which resets all BIOS settings to the factory defaults. Save & Exit Screen SA-5700 SERIES USER MANUAL Page: 5-44...
  • Page 113 Saves the changes done so far as User No changeable options Defaults Defaults. Restore User Restores the User Defaults to all the BIOS No changeable options Defaults settings. Boot Override - [Drive(s)] Forces to boot from selected [drive(s)]. SA-5700 SERIES USER MANUAL Page: 5-45...

  • Page 114: Appendix A System Diagrams

    This appendix includes the exploded diagrams of the system and the parts list as well as the part numbers of the SA-5700 system. • SA-5700 System Exploded Diagram • SA-5700 CPU Heat Sink Exploded Diagram • SA-5700 SATA HDD Exploded Diagram SA-5700 SERIES USER MANUAL Page: A-1...

  • Page 115: Sa-5700 System Exploded Diagram

    Appendix A System Diagrams SA-5700 System Exploded Diagram Page: A-2 SA-5700 SERIES USER MANUAL...
  • Page 116 Appendix A System Diagrams Page: A-3 SA-5700 SERIES USER MANUAL...

  • Page 117: Sa-5700 Cpu Heat Sink Exploded Diagram

    Appendix A System Diagrams SA-5700 CPU Heat Sink Exploded Diagram Component Name Part No. Q’ty SB-5700 MAINBOARD SP-7625 CPU HEAT SINK(φ96x16.8) & 21-003-09595002 FAN(95x95x13mm) L=300mm SA-5700 SERIES USER MANUAL Page: A-4...

  • Page 118: Sa-5700 Sata Hdd Exploded Diagram

    Appendix A System Diagrams SA-5700 SATA HDD Exploded Diagram Component Name Part No. Q’ty PMB-531LF DRIVE BAY FOR 2.5” HDD 20-004-03001082 2.5”_HDD_SATA FILLISTER HEAD SCREW #2 / M3x0.5Px5mm 22-272-30049015 Page: A-5 SA-5700 SERIES USER MANUAL...

  • Page 119: Appendix B Technical Summary

    The following topics are included: • System Block Diagram • Interrupt Map • I/O Map • DMA Channels Map • Memory Map • Configuring WatchDog Timer • Flash BIOS Update Page: B-1 SA-5700 SERIES USER MANUAL...

  • Page 120: System Block Diagram

    High Definition Codec SPI Flash ROM LOW PIN COUNT 80 PORT for Debug COM1 RS232/422/485 Connector FINTEK COM2/3/4/5/6 RS232 LPC SIO CPU FAN*1, SYSTEM FAN*1 COM1/2/4 support 5V/12V F81866AD-I HW monitor LPT Port [Wafer 25pins] SA-5700 SERIES USER MANUAL Page: B-2...

  • Page 121: Interrupt Map

    IRQ 58 Microsoft ACPI-Compliant System IRQ 59 Microsoft ACPI-Compliant System IRQ 60 Microsoft ACPI-Compliant System IRQ 61 Microsoft ACPI-Compliant System IRQ 62 Microsoft ACPI-Compliant System IRQ 63 Microsoft ACPI-Compliant System IRQ 64 Microsoft ACPI-Compliant System SA-5700 SERIES USER MANUAL Page: B-3...
  • Page 122 IRQ 85 Microsoft ACPI-Compliant System IRQ 86 Microsoft ACPI-Compliant System IRQ 87 Microsoft ACPI-Compliant System IRQ 88 Microsoft ACPI-Compliant System IRQ 89 Microsoft ACPI-Compliant System IRQ 90 Microsoft ACPI-Compliant System IRQ 91 Microsoft ACPI-Compliant System SA-5700 SERIES USER MANUAL Page: B-4...
  • Page 123 IRQ 112 Microsoft ACPI-Compliant System IRQ 113 Microsoft ACPI-Compliant System IRQ 114 Microsoft ACPI-Compliant System IRQ 115 Microsoft ACPI-Compliant System IRQ 116 Microsoft ACPI-Compliant System IRQ 117 Microsoft ACPI-Compliant System IRQ 118 Microsoft ACPI-Compliant System SA-5700 SERIES USER MANUAL Page: B-5...
  • Page 124 IRQ 139 Microsoft ACPI-Compliant System IRQ 140 Microsoft ACPI-Compliant System IRQ 141 Microsoft ACPI-Compliant System IRQ 142 Microsoft ACPI-Compliant System IRQ 143 Microsoft ACPI-Compliant System IRQ 144 Microsoft ACPI-Compliant System IRQ 145 Microsoft ACPI-Compliant System SA-5700 SERIES USER MANUAL Page: B-6...
  • Page 125 IRQ 166 Microsoft ACPI-Compliant System IRQ 167 Microsoft ACPI-Compliant System IRQ 168 Microsoft ACPI-Compliant System IRQ 169 Microsoft ACPI-Compliant System IRQ 170 Microsoft ACPI-Compliant System IRQ 171 Microsoft ACPI-Compliant System IRQ 172 Microsoft ACPI-Compliant System SA-5700 SERIES USER MANUAL Page: B-7...
  • Page 126 IRQ 193 Microsoft ACPI-Compliant System IRQ 194 Microsoft ACPI-Compliant System IRQ 195 Microsoft ACPI-Compliant System IRQ 196 Microsoft ACPI-Compliant System IRQ 197 Microsoft ACPI-Compliant System IRQ 198 Microsoft ACPI-Compliant System IRQ 199 Microsoft ACPI-Compliant System SA-5700 SERIES USER MANUAL Page: B-8...
  • Page 127 IRQ 271 Microsoft ACPI-Compliant System IRQ 272 Microsoft ACPI-Compliant System IRQ 273 Microsoft ACPI-Compliant System IRQ 274 Microsoft ACPI-Compliant System IRQ 275 Microsoft ACPI-Compliant System IRQ 276 Microsoft ACPI-Compliant System IRQ 277 Microsoft ACPI-Compliant System SA-5700 SERIES USER MANUAL Page: B-9...
  • Page 128 IRQ 298 Microsoft ACPI-Compliant System IRQ 299 Microsoft ACPI-Compliant System IRQ 300 Microsoft ACPI-Compliant System IRQ 301 Microsoft ACPI-Compliant System IRQ 302 Microsoft ACPI-Compliant System IRQ 303 Microsoft ACPI-Compliant System IRQ 304 Microsoft ACPI-Compliant System SA-5700 SERIES USER MANUAL Page: B-10...
  • Page 129 IRQ 325 Microsoft ACPI-Compliant System IRQ 326 Microsoft ACPI-Compliant System IRQ 327 Microsoft ACPI-Compliant System IRQ 328 Microsoft ACPI-Compliant System IRQ 329 Microsoft ACPI-Compliant System IRQ 330 Microsoft ACPI-Compliant System IRQ 331 Microsoft ACPI-Compliant System SA-5700 SERIES USER MANUAL Page: B-11...
  • Page 130 IRQ 352 Microsoft ACPI-Compliant System IRQ 353 Microsoft ACPI-Compliant System IRQ 354 Microsoft ACPI-Compliant System IRQ 355 Microsoft ACPI-Compliant System IRQ 356 Microsoft ACPI-Compliant System IRQ 357 Microsoft ACPI-Compliant System IRQ 358 Microsoft ACPI-Compliant System SA-5700 SERIES USER MANUAL Page: B-12...
  • Page 131 IRQ 379 Microsoft ACPI-Compliant System IRQ 380 Microsoft ACPI-Compliant System IRQ 381 Microsoft ACPI-Compliant System IRQ 382 Microsoft ACPI-Compliant System IRQ 383 Microsoft ACPI-Compliant System IRQ 384 Microsoft ACPI-Compliant System IRQ 385 Microsoft ACPI-Compliant System SA-5700 SERIES USER MANUAL Page: B-13...
  • Page 132 IRQ 406 Microsoft ACPI-Compliant System IRQ 407 Microsoft ACPI-Compliant System IRQ 408 Microsoft ACPI-Compliant System IRQ 409 Microsoft ACPI-Compliant System IRQ 410 Microsoft ACPI-Compliant System IRQ 411 Microsoft ACPI-Compliant System IRQ 412 Microsoft ACPI-Compliant System SA-5700 SERIES USER MANUAL Page: B-14...
  • Page 133 IRQ 433 Microsoft ACPI-Compliant System IRQ 434 Microsoft ACPI-Compliant System IRQ 435 Microsoft ACPI-Compliant System IRQ 436 Microsoft ACPI-Compliant System IRQ 437 Microsoft ACPI-Compliant System IRQ 438 Microsoft ACPI-Compliant System IRQ 439 Microsoft ACPI-Compliant System SA-5700 SERIES USER MANUAL Page: B-15...
  • Page 134 IRQ 460 Microsoft ACPI-Compliant System IRQ 461 Microsoft ACPI-Compliant System IRQ 462 Microsoft ACPI-Compliant System IRQ 463 Microsoft ACPI-Compliant System IRQ 464 Microsoft ACPI-Compliant System IRQ 465 Microsoft ACPI-Compliant System IRQ 466 Microsoft ACPI-Compliant System SA-5700 SERIES USER MANUAL Page: B-16...
  • Page 135 IRQ 487 Microsoft ACPI-Compliant System IRQ 488 Microsoft ACPI-Compliant System IRQ 489 Microsoft ACPI-Compliant System IRQ 490 Microsoft ACPI-Compliant System IRQ 491 Microsoft ACPI-Compliant System IRQ 492 Microsoft ACPI-Compliant System IRQ 493 Microsoft ACPI-Compliant System SA-5700 SERIES USER MANUAL Page: B-17...
  • Page 136 Intel(R) I210 Gigabit Network Connection 4294967288 Intel(R) I210 Gigabit Network Connection 4294967287 Intel(R) I210 Gigabit Network Connection 4294967286 Intel(R) I210 Gigabit Network Connection 4294967285 Intel(R) I210 Gigabit Network Connection 4294967284 Intel(R) Management Engine Interface SA-5700 SERIES USER MANUAL Page: B-18...
  • Page 137 Intel(R) USB 3.0 eXtensible Host Controller - 1.0 4294967290 (Microsoft) Intel(R) Ethernet Connection (2) I219-V 4294967292 Intel(R) HD Graphics 630 4294967291 Standard SATA AHCI Controller 4294967293 Intel(R) 100 Series/C230 Series Chipset Family PCI Express 4294967294 Root Port #6 - A115 SA-5700 SERIES USER MANUAL Page: B-19...

  • Page 138: I/O Map

    0x0000FFFF-0x0000FFFF Motherboard resources 0x0000FFFF-0x0000FFFF Motherboard resources 0x00001800-0x000018FE Motherboard resources 0x0000164E-0x0000164F Motherboard resources 0x00000378-0x0000037F Printer Port (LPT1) 0x0000F000-0x0000F03F Intel(R) HD Graphics 630 0x000003B0-0x000003BB Intel(R) HD Graphics 630 0x000003C0-0x000003DF Intel(R) HD Graphics 630 0x00000800-0x0000087F Motherboard resources SA-5700 SERIES USER MANUAL Page: B-20...
  • Page 139 Family SMBus - A123 0x00000020-0x00000021 Programmable interrupt controller 0x00000024-0x00000025 Programmable interrupt controller 0x00000028-0x00000029 Programmable interrupt controller 0x0000002C-0x0000002D Programmable interrupt controller 0x00000030-0x00000031 Programmable interrupt controller 0x00000034-0x00000035 Programmable interrupt controller 0x00000038-0x00000039 Programmable interrupt controller 0x0000003C-0x0000003D Programmable interrupt controller SA-5700 SERIES USER MANUAL Page: B-21...

  • Page 140: Dma Channels Map

    Programmable interrupt controller 0x000000B4-0x000000B5 Programmable interrupt controller 0x000000B8-0x000000B9 Programmable interrupt controller 0x000000BC-0x000000BD Programmable interrupt controller 0x000004D0-0x000004D1 Programmable interrupt controller 0x00001854-0x00001857 Motherboard resources DMA Channels Map DMA Channels Map Assignment Channel 3 Printer Port (LPT1) SA-5700 SERIES USER MANUAL Page: B-22...

  • Page 141: Memory Map

    Family PCI Express Root Port #6 - A115 0xDF000000-0xDF0FFFFF Intel(R) I210 Gigabit Network Connection 0xFED00000-0xFED003FF High precision event timer 0xDF148000-0xDF149FFF Standard SATA AHCI Controller 0xDF14C000-0xDF14C0FF Standard SATA AHCI Controller 0xDF14B000-0xDF14B7FF Standard SATA AHCI Controller SA-5700 SERIES USER MANUAL Page: B-23...
  • Page 142 Intel(R) 100 Series/C230 Series Chipset 0xDF14A000-0xDF14A0FF Family SMBus - A123 0xDF100000-0xDF11FFFF Intel(R) Ethernet Connection (2) I219-V Intel(R) 100 Series/C230 Series Chipset 0xDF14E000-0xDF14EFFF Family Thermal subsystem - A131 0xDF140000-0xDF143FFF High Definition Audio Controller 0xDF120000-0xDF12FFFF High Definition Audio Controller SA-5700 SERIES USER MANUAL Page: B-24...

  • Page 143: Configuring Watchdog Timer

    To exit the Extended Function Mode, writing 0xAA to the EFER is required. Once the chip exits the Extended Function Mode, it is in the normal running mode and is ready to enter the configuration mode. SA-5700 SERIES USER MANUAL Page: B-25...
  • Page 144 ;------------------------------- Enable Watch PME-------------------------------------------- 0FAh dx, al dx, al ;------------------- Set second as counting unit and start counting -------------------- 0F5h dx, al 0F7h dx, al ;---------------------------- Exit the extended function mode ------------------------------ 0AAh dx, al SA-5700 SERIES USER MANUAL Page: B-26...

  • Page 145: Flash Bios Update

    (3) The system will go into the BIOS setup menu. (4) Select [Boot] menu and enter into [CSM Configuration] menu. (5) Set [Boot option filter] to [UEFI Only] and press <F4> to save the configuration and restart the system. SA-5700 SERIES USER MANUAL Page: B-27...
  • Page 146 (6) Press <ESC> or <DEL> to enter BIOS setup menu again. (7) Select [Boot] menu and set [UEFI: Built-in EFI Shell] to be the 1 boot device. (8) Press <F4> to save the configuration and restart the system to boot into EFI Shell environment. SA-5700 SERIES USER MANUAL Page: B-28...
  • Page 147 BIOS ROM and the system will be unable to boot up next time. After BIOS update procedure is completed, the following messages will be shown: SA-5700 SERIES USER MANUAL Page: B-29...
  • Page 148 Restart the system and boot up with the new BIOS configuration. The BIOS Update is completed after the system is restarted. Reboot the system and verify if the BIOS version shown on the initialization screen has been updated. SA-5700 SERIES USER MANUAL Page: B-30...

Table of Contents