TP-Link c1200 Configuration Manual page 4

Hide thumbs Also See for c1200:

Configuration Guide

4. CONFIGURING WI-FI

To use Wi-Fi, ensure that you have already setup your wireless

adapter on your PC/laptop.

A. Click Start -> Settings -> Network and Internet

B. Click Wi-Fi and then find the SSID (Network name) of your

modem. By default, the network name should be

TP-LINK_XXXX (XXXX is a random 4 digit alpha numeric code).

C. Ensure Connect Automatically is ticked,

and then Click Connect.

D. You will now be prompted to enter your network security

key/ Wireless password. By default, the password is

printed on a sticker underneath your router

(Wireless Password/Pin).

E. Click NEXT to finish.

Note: You'll see an option that says "share this network with

my contacts". We recommend you don't tick this box.

F. You should now see your status as 'Connected'.

5. CHANGE OF PASSWORD

For security purposes we highly recommend that you change your

password if you are using your default or

if you believe your password security has been compromised.

To change your password, first please visit

Your new password will take approximately 10-15 minutes to take effect,

after which you must reconfigure your new password in your router.

PLEASE NOTE:

Each time your router is powered on, it will initialize this automated authentication process after which your router will receive

a public IP address (fixed or dynamic depending on your plan) and DNS settings from TPG.

tpg.com.au/support

www.tpg.com.au/password

13 14 23

TP-LINK C1200

TP-LINK_XXXX