Advertisement
The following information is displayed on the screen during the device
operation:
1. Response value to the metal
2. Display backlight is on
3. Sound is on (off)
4. Battery charge condition
5. Response scale to the metal
6. Button B1 – Turn on/off display backlight
7. Button B2 – menu
8. Button B3 – reset
RESET
Raise the coil off the ground and put it off away from the metal objects -
push button <B3>
become «0», and on the response scale should not be any scale division.
If after the resetting false actuations occur, you should set up trigger
threshold.
By pushing button once <B2>
pulse induction metal detector - impulse
1
2
5
6
7
3
Main screen
«Reset» - response value should
2
3
4
1
8
Page 7
Advertisement
