Advertisement
Quick Links
Advertisement
Summary of Contents for IDEVICO IMPULSE 2
- Page 1 OPERATION MANUAL impulse pulse induction metal detector...
- Page 2 – is the pulse induction metal detector, which is able to detect impulse metal objects in soil, water and other types of environment. This metal detector makes no difference and able to detect all types of metals. With this metal detector one can connect search devices (coil) of different sizes depending on what you are going to search for.
- Page 3 Connection 1. Connect the coil and power battery and to the metal detector as shown on picture down below: coil Do not close contacts of the coil; it may lead to the malfunction of the device 2. When connecting the device for the first time or when changing the settings you should go to the settings menu.
-
Page 4: Settings Menu
SETTINGS MENU Depending on the chosen mode the buttons have different functions, are shown on icon above the button. Pulse induction width Metal detector to do the search conveys “pulse” to the coil. Depending on the “width” of this impulse distance to the searched object also differs. Also, one can set up small and big coil in the optimum way. - Page 5 Power consumption For correct display of battery icon please select the correct type of power source connection: - 3 LiION – connected in series of three Li-ION batteries. - Pb– lead battery 12 Volts. - 10 NiMH– connected in series of ten batteries type АА 1.2 Volts each. Do not connect to the device to any power source with more than 16 Volts! It may lead to the device malfunction.
- Page 6 Display brightness Select the desirable backlight brightness of the display for work in badly lit places or in the night time. To turn on/off the backlight push “backlight” button on the main screen Display contrast Select the desirable contrast of the display. To exit settings menu - push and hold button <B2>...
- Page 7 The following information is displayed on the screen during the device operation: Main screen 1. Response value to the metal 2. Display backlight is on 3. Sound is on (off) 4. Battery charge condition 5. Response scale to the metal 6.
- Page 8 Go to trigger threshold menu and set up the required trigger threshold – with buttons <B1> and <B3> Now when putting the coil closer the metal object the response value will increase, on the response scale you will see divisions the number of which is proportionate to the size of metal object and distance to it.