Advertisement
Connection
1. Connect the coil and power battery and to the metal detector as
shown on picture down below:
coil
Do not close contacts of the coil; it may lead to the malfunction of the
device
2. When connecting the device for the first time or when changing the
settings you should go to the settings menu. To do so, hold menu
button <B2>
3. Selection is done using buttons
<B1>
To go to the next menu entry push button
<B2>
4. To exit the menu - hold button
<B2>
pulse induction metal detector - impulse
(more than 2 seconds)
and <B3>
(more than 2 seconds)
2
.
Page 3
Advertisement
