Advertisement
Power consumption
For correct display of battery icon please select the correct type of power
source connection:
- 3 LiION – connected in series of three Li-ION batteries.
- Pb– lead battery 12 Volts.
- 10 NiMH– connected in series of ten batteries type АА 1.2 Volts each.
Do not connect to the device to any power source with more than 16 Volts!
It may lead to the device malfunction.
Filter
When device is working with maximum sensitivity false actuations may
occur.
In order to decrease number of false actuations, please select one of four
filters:
0. Filter is off – maximum sensitivity, but occurrence of false actuation is
high.
1. Filter «1» - arithmetical average of the signal – sensitivity is good,
possibility of false actuation is low.
2. Filter «2» - few responses values higher than threshold of
subsequent ones – sensitivity excellent, possibility of false actuations
is low.
3. Filter «3» - dynamic «reset» is useful in case of «drift» – sensitivity is
average, possibility of false actuations is low.
pulse induction metal detector - impulse
2
Page 5
Advertisement
