Honda VTX1300T 2009 Owner's Manual page 179

3. Remove the fixing bolts ( ) and
remove the right brake caliper assembly
( ) from the fork leg ( ). 2
To avoid damage to the brake hose
during removal, support the caliper
assembly so that it doesn't hang from
the hose. Do not twist the brake hose.
Avoid getting grease, oil, or dirt on
the disc or pad surfaces. Any
contamination can cause poor brake
performance or rapid pad wear after
reassembly.
1
3
If You Have a Flat Tire
4. Remove the front axle bolt ( ), and
then loosen the right and left axle pinch
bolts ( ). 5
RIGHT FRONT
(4)
(5)
(4) front axle bolt
(5) axle pinch bolts
Taking Care of the Unexpected
4
(cont'd)
171