Basic Functions; Pairing Your Headset To Bluetooth Devices - scala rider FREECOM 1 Manual

3.4 BASIC FUNCTIONS

TO TURN THE VOLUME UP FOR CURRENT AUDIO SOURCE:
+
• Tap .
With each tap, a louder tone is played on the speaker until you reach the maximum volume, as indicated by the maximum
volume tone.
TO TURN THE VOLUME DOWN FOR CURRENT AUDIO SOURCE:
-
• Tap .
With each tap, a quieter tone is played on the speaker until you reach the minimum volume, as indicated by the minimum
volume tone.
TO MUTE THE MICROPHONE COMPLETELY AND LOWER THE SPEAKER VOLUME FOR THE CURRENT STATE:
+ -
• Tap and .
The red LED comes on for 2 seconds and a descending tone is played on the speaker.
Automatic Gain Control (AGC) adjusts your speaker volume according to ambient noise and riding speed. To adjust AGC
sensitivity, see "Configuring Your FREECOM 1 Basic Settings through SmartSet" on page 11.

3.5 PAIRING YOUR HEADSET TO BLUETOOTH DEVICES

Your FREECOM 1 has two Bluetooth channels for connection to Bluetooth devices such as mobile phones, GPS devices and
Bluetooth music players with A2DP.
To connect your FREECOM 1 to a Bluetooth device, you must first pair them. Once paired, they automatically recognize each
other whenever they are within range.
TO PAIR BLUETOOTH CHANNEL 1 TO A BLUETOOTH DEVICE:
1. Enable Bluetooth on the device (such as mobile phone, GPS device, music player).
n
2. Press for 5 seconds. The LED flashes red and blue.
3. Search for Bluetooth devices on your device as described in your device's instructions.
4. After a few seconds the device lists your FREECOM 1. Select it.
5. If prompted for a PIN or Passkey, enter 0000 (four zeros).
6. The device confirms that pairing has succeeded and the LED flashes purple for 2 seconds.
TO PAIR BLUETOOTH CHANNEL 2 TO ANOTHER BLUETOOTH DEVICE:
1. Enable Bluetooth on the device (such as mobile phone, GPS device, music player).
n
2. Press for 5 seconds. The LED flashes red and blue.
n
3. Tap twice. The LED starts flashing red and green.
4. Search for Bluetooth devices on your device as described in your device's instructions.
5. After a few seconds the device lists your FREECOM 1. Select it.
6. If prompted for a PIN or Passkey, enter 0000 (four zeros).
7. The device confirms that pairing has succeeded and the LED flashes purple for 2 seconds.
TO PAIR BLUETOOTH CHANNEL 2 TO A GPS DEVICE:
1. Enable Bluetooth pairing on the GPS device (consult your GPS device's user manual for more information).
n
2. Press for 5 seconds. The LED flashes red and blue.
If you want to pair the GPS device to Bluetooth channel 1, skip the following step.
+
3. Tap twice. The LED starts flashing red and green.
+
4. Tap . The LED flashes slowly.
5. The device confirms that pairing has succeeded and the LED flashes purple for 2 seconds
• If pairing is not completed within 2 minutes, the headset automatically returns to Standby.
• If you have paired two different mobile phones directly to your FREECOM 1, set one as default for making calls (see
"Setting the Default Mobile Phone" on page 15).
• Not all Bluetooth mobile phones broadcast Bluetooth Stereo music (A2DP), even if the phone has an MP3 player function.
Consult your mobile phone's user manual for more information.
• Not all Bluetooth GPS devices allow connection to Bluetooth audio devices. Consult your GPS User Manual for more
information.
1