Getting Started; Getting To Know Your Freecom; Switching Your Unit On/Off; Different Ways To Operate Your Freecom - scala rider Rider Freecom 1 Manual

3. GETTING STARTED

3.1 GETTING TO KNOW YOUR FREECOM 1

3.2 SWITCHING YOUR UNIT ON/OFF

To switch your FREECOM 1 on:
Press and for 1 second. The speaker plays an ascending tone and a voice message "Hello FREECOM 1".
●
In all battery states, the LED flashes blue three times repeatedly, confirming that your FREECOM 1 is on.
To switch your FREECOM 1 off:
Tap and .
●
In all battery states, the LED flashes red three times repeatedly, confirming that your FREECOM 1 is switching off.
The speaker plays a descending tone and a voice message "Goodbye".
Connecting your unit to a charger switches off the unit.

3.3 DIFFERENT WAYS TO OPERATE YOUR FREECOM 1

You can operate the various features by any of the following methods:
Pressing a button or combination of buttons on the unit.
●
Using the SmartSet app on your mobile device (once it is paired with the unit).
●
LEDs, tones and voice announcements guide you while using the functions of your FREECOM 1, as described in
FREECOM 1 Modes and Events - LED Indications
This manual describes the most suitable method or methods to operate each feature.

3.4 BASIC FUNCTIONS

To turn the volume up for current audio source:
Tap .
●
With each tap, a louder tone is played on the speaker until you reach the maximum volume, as indicated by the
maximum volume tone.
To turn the volume down for current audio source:
Tap .
●
With each tap, a quieter tone is played on the speaker until you reach the minimum volume, as indicated by the
minimum volume tone.
on page 21.
6