Checking Battery Status Through The Cardo Smartset App; On The Road; Making And Receiving Phone Calls; Making Phone Calls - scala rider FREECOM 1 Manual

TO SET THE DEFAULT PHONE THROUGH THE HEADSET:
• During a mobile call, press

4.6 CHECKING BATTERY STATUS THROUGH THE CARDO SMARTSET APP

BATTERY STATUS ON YOUR MOBILE PHONE
If you installed the SmartSet App on your mobile phone, you can check the battery status as follows:
• Android – the headset battery indicator appears in the app bottom right-corner, as well as in the notification bar:
• iOS – the headset battery indicator appears next to the iPhone battery indicator.
If your FREECOM 1 battery level reaches 20%, you hear a battery status voice announcement warning you that your battery
is low.

5. ON THE ROAD

5.1 MAKING AND RECEIVING PHONE CALLS

You can use your mobile phone normally to make and receive mobile phone calls while paired to your FREECOM 1.

5.1.1 MAKING PHONE CALLS

TO MAKE A PHONE CALL THROUGH THE HEADSET BUTTONS:
• with your mobile phone's voice dialing – tap
• dialing the default speed dial number – tap
• redialing the last number called – press
TO MAKE A PHONE CALL THROUGH THE SMARTSET APP:
• In the The SmartSet App, either:
• tap Phone then tap the required speed dial (to define speed dials, see "Configuring Speed Dial Numbers" on page 7).
OR
• tap REDIAL.

5.1.2 ANSWERING PHONE CALLS

TO ANSWER A PHONE CALL THROUGH THE HEADSET BUTTONS:
n v
• Tap or .
TO ANSWER A PHONE CALL THROUGH VOX:
• Say a word loudly.
n
for 5 seconds.
v
and
n
three times.
+
for 2 seconds (not available during mobile calls).
n
(not available during mobile calls).
1