Configuring Your Freecom 1 Basic Settings Through Cardo Community; Using Parallel Audio Streaming - scala rider FREECOM 1 Manual

4.2.2 CONFIGURING YOUR FREECOM 1 BASIC SETTINGS THROUGH CARDO COMMUNITY

TO CONFIGURE YOUR FREECOM 1 THROUGH THE CARDO COMMUNITY:
1. Run the Cardo Updater.
2. Using the USB cable provided with your FREECOM 1, connect your headset to the computer USB port. The
GENERAL SETTINGS window appears:
3. Set the options you require for each feature, using the provided explanations as a guide.
If a new firmware version is available, follow the instructions on the screen to update your phone with the latest features.

4.3 USING PARALLEL AUDIO STREAMING

With parallel audio streaming, you can hear GPS instructions during a mobile call or while listening to music.
FREECOM 1 sets the various audio sources to either foreground (volume remains the same) or background (volume reduced)
as described in the following table:
Mobile Phone 1/2
Foreground
1
If you play music only, the music volume is not reduced.
GPS
Foreground
Foreground
Music
Background
Foreground
1
1