Wireless Setup; Basic Wireless Settings - Cisco VEN401 User Manual

Wireless Setup

Basic Wireless Settings

Use the Basic Settings screen to the wireless interface for your device.
1 If you are configuring a VEN402 client device, you may enter the Network Name
(SSID) for the wireless network you want to join in the field provided.
Otherwise, go to step 2.
2 From the Wireless Network Wireless Interface field, select which wireless
interface you want to configure.
3 Do you have any Wireless-N (5GHz) devices in your network?

If yes, select Enabled for the Interface field to run wireless on your network.

If no, select Disabled.
4038769 Rev 01
DRAFT

Wireless Setup

11