Mazda CX-52017 Owner's Manual page 584

Hide thumbs Also See for CX-52017:
Table of Contents

Advertisement

If Trouble Arises
Warning/Indicator Lights and Warning Sounds
Power Liftgate Warning Beep
If system operation precautions are
necessary, the driver is notifi ed by the
warning sound.
Cautions
The beep sounds 3 times
The beep sound
continues
Electric Parking Brake (EPB)
Warning Beep
The warning buzzer is activated under the
following conditions:
The vehicle is driven with the electric
      
parking brake (EPB) applied.
The electric parking brake (EPB) switch
      
is pulled while the vehicle is driven.
AUTOHOLD Warning Beep
Warning light fl ashes/message is
displayed and beep sound is activated
simultaneously for about fi ve seconds
when using AUTOHOLD function or
when AUTOHOLD switch is operated.
Because a problem with AUTOHOLD
function has occurred, AUTOHOLD
function does not operate even if
AUTOHOLD switch is operated.
If the warning light fl ashes/message is
displayed and the beep sound is activated
simultaneously, have your vehicle
inspected at an Authorized Mazda Dealer.
7–42
*Some models.
*
What to check
The conditions required
for the power liftgate
to operate have not
been met, such as an
object being stuck in the
liftgate.
The vehicle is being
driven with the liftgate
open. Stop the vehicle
and close the liftgate.
Power Steering Warning Buzzer
If the power steering system has
a malfunction, the power steering
malfunction light turns on or fl ashes and
the buzzer operates at the same time.
Refer to Warning Indication/Warning
Lights on page 4-33 .
Tire Infl ation Pressure Warning
Beep
*
The warning beep sound will be heard
for about 3 seconds if the tire pressures
decrease.
If the tire pressure decreases extremely,
a beep sound will be heard for
approximately 30 seconds.
Refer to Tire Pressure Monitoring System
on page 4-172 .
Blind Spot Monitoring (BSM)
Warning Beep
*
Driving forward
The warning beep operates when the turn
signal lever is operated to the side where
the Blind Spot Monitoring (BSM) warning
light is illuminated.
NOTE
A personalized function is available to
change the Blind Spot Monitoring (BSM)
warning beep sound volume.
Refer to Personalization Features on page
9-11 .
Reversing
If a moving object such as a vehicle or
two-wheeled vehicle approaches on the
left or right from behind your vehicle, the
Blind Spot Monitoring (BSM) warning
sound is activated.

Advertisement

Table of Contents
loading

Table of Contents