Mazda CX-52017 Owner's Manual page 457

NOTE
When the OS of the device is updated, the pairing information may be deleted. If this
      
happens, reprogram the pairing information to the Bluetooth
If you pair your phone which has already been paired to your vehicle more than once in
      
the past, you need to delete "Mazda" on your mobile device. Then, execute the Bluetooth
search on your mobile device once again, and pair to a newly detected "Mazda".
Before you pair your device, make sure that Bluetooth
      
on the vehicle.
If Bluetooth -enabled devices are used in the following locations or conditions,
®
      
connection via Bluetooth
The device is in a location hidden from the center display such as behind or under a
      
seat, or inside the glove compartment.
The device contacts or is covered by a metal object or body.
      
The device is set to power-saving mode.
      
Different Bluetooth
      
Bluetooth audio. For example, device A can be connected as a Bluetooth
®
Free device and device B can be connected as a Bluetooth
following may occur when they are used at the same time.
The Bluetooth
®
      
Noise occurs in the Hands-Free audio.
      
Hands-Free operates slowly.
      
may not be possible.
®
-enabled devices can be used for Bluetooth
®
connection of the device is disconnected.
Audio Set [Type B (touchscreen)]
®
is "ON", both on your phone and
®
audio device. However, the
®
Interior Features
unit.
Hands-Free and
®
Hands-
®
5–129
®