Mazda CX-52017 Owner's Manual page 508

Maintenance and Care
Owner Maintenance
6. After pulling the blade rubber in the
direction of the arrow and sliding the
blade rubber to a position to check the
blade holder groove, slide the blade
rubber end in the opposite direction.
Groove
7. Make sure that the blade rubber is
correctly installed to the blade holder.
8. Align the wiper arm tabs with the blade
component grooves.
6–32
9. Align the blade component projection
10. Slide the blade component and install it
11. Slowly lower the wiper arm onto the
When the wiper no longer cleans well, the
blade is probably worn or cracked.
Replace it.
Tabs
Grooves
with the wiper arm notch.
Notch
Projection
to the wiper arm.
windshield.
Replacing Rear Window Wiper
Blade
CAUTION
To prevent damage to the wiper arm
and other components, do not move
the wiper by hand.