Filter Cleaning - LG PS-S200CW Service Manual

4
Operations/Functions Manual

Filter Cleaning

• The prefilter should be cleaned on a monthly basis.
1 Turn unit off and unplug before cleaning.
Open the front panel.
2 Remove the filter from the mainframe by pulling the handle near the center of the
filter.
Align latches into the groves to reinstall.
3 Pull the HEPA filter and deodorizer filter to the front to separate from
the main unit.
4 Clean the Pre-filter with a vacuum cleaner or a soft brush.
(Clean the filter every a month.)
Clean the Pre-filter with a vacuum cleaner or a soft brush, and when the
contamination is severe, use a neutral detergent and water to clean it off.
5 To clean both the HEPA filter and the Deodorizing filter, soak the filter in
warm water with a mild detergent for 1 hour. Remove particles from the filter
by shaking the water from the filter. Rinse the filter with warm water. Let air
dry before placing filters back in the unit.
Filter type
Pre-filter
Washable HEPA filter Clean frequency of about 6 months
Washable deodorizer filter Clean frequency of about 6 months
• For your safety, turn off and unplug the air purifier before cleaning.
• Allow the filters to completely dry before using.
Caution
• Utilizing the unit before all the filters are completely dry may result in the odors from the unit.
• Replace filters when unable to remove all dirt on the filter.
• Do not rub filters with your hands.
LGE Internal Use Only
Cleaning frequency
Clean frequency of about 1 month
-13- Copyright © 2007 LG Electronics. Inc. All right reserved.
Only for training and service purposes
Front
panel
When disassembling
When assembling