Advertisement
PA168V H323 FXS Gateway Telnet Setup Guide (V1.60)
While calling card is set, set password of the chosen card; while
local type is set to use authentication type, set password.
set rasport XXXX
Set register port. XXXX ranges from 1024 through 65535.
set q.931port XXXX
Set signal port. XXXX ranges from 1024 through 65535.
set h245port XXXX
Set control port. XXXX ranges from 1024 through 65535.
set rtpport XXXX
RTP port is the port transferring and receiving voice flow by using
UDP protocol. XXXX is an even number between 1024 and 65535.
set tos X
Set TOS segment of IP head package in RTP digital follow. X
ranges from 0 through 224.
set localtype X
This command is to set how PA168V FXS gateway logs in
gatekeeper. X ranges from 0 through 6: 0: use phone number as
E.164 and H323 ID to login the GK; 1: use phone number as
E.164 and designated H323 ID by setting account XXX command;
2: use support automated negotiate about MD5 or CAT
authentication system.3: use MD5 authentication account and pin;
4: use CAT authentication account and pin; 5: use SHA1
16
Advertisement
