Display In Measuring Mode - GANN Hydromette BL Compact TF-IR Manual

2.2

Display in Measuring Mode

Figure 2-2: measuring mode
A measurement process is started by pressing the "M" button.
During the measurement process, the "%" symbol blinks and the
values adapt to the surrounding conditions. After releasing the "M"
button, the "%" symbol is displayed steadily and the "Hold" symbol
also appears.
The device is now in Ready mode.
Press the "M" button again to start a new measurement.
Approx. 40 seconds after releasing the measurement button, the
device automatically switches off to save battery power. When the
device is switched on again, the last value measured is shown on
the display.
Hydromette BL Compact TF-IR
Measured value in %
"Hold" symbol signals readiness to
make a measurement
Measured temperature in °C
Calculated dew point (Dp)
in °C
Basic Functions
11