Siemens Gigaset SL78H User Manual page 63

Gigaset SL785 / EN-US / A31008-M2009-XXXX-1-XX / appendix.fm / 09.01.2009
Transferring data
You can synchronize your telephone direc-
tory with Outlook using the Gigaset
QuickSync program (see the program's
Help functions).
During the transfer of data between hand-
set and PC, you will see
progress on the display. During this time,
the keypad is disabled, and incoming calls
will be ignored.
Updating the firmware
¤
Connect your phone to your PC using
the USB cable supplied (
¤
Start the Gigaset QuickSync program
on your PC.
¤
Establish a connection to your handset.
¤
Select [Settings]
ties] to open the [Device] tab
¤
Click [Firmware Update]
This launches the firmware update.
The data is initially loaded from the
update server over the Internet.
The amount of time this takes depends on
the speed of your Internet connection.
The display on your phone is switched off,
and the Message key f and Handsfree
key d start flashing.
The update process can take up to 10 min-
utes (not including the download time).
Do not interrupt the process or remove
the USB cable. Once the update is com-
plete, your phone will automatically
restart.
Data transfer in
¢
page 16).
¢
[Device Proper-
Additional functions in the PC interface
Procedure in case of an error
If your phone does not work properly fol-
lowing the update, repeat the update
process. If you cannot establish a connec-
tion to the PC, proceed as follows:
¤
Remove the USB cable from the tele-
phone
¤
Remove the battery (
¤
Press and hold keys 4 and L
simultaneously
¤
Replace the battery
¤
Reconnect the USB cable
¤
Release keys 4 and L simultane-
ously
Proceed as described under "Updating
the firmware".
ò
Bluetooth Qualified Design Identity
The Bluetooth QD ID for your Gigaset
SL78H is: B013322.
¢
page 12)
63