Advertisement
Pre-Treating
IMPORTANT: Check the manufacturer's tag before cleaning upholstery. "W"
or "WS" on the tag means you can use your SpotLifter. If tag is coded with an
"S" (with diagonal strike-through), or says "Dry Clean Only," do not proceed. If
manufacturer's tag is missing or not coded, check with your furniture dealer.
1
3
Battery status lights will illuminate to
show how much battery remains.
5
Spray the cleaning solution on the stain
until the entire area is saturated.
Check the
manufacturer's tag
before cleaning
upholstery. "W" or
"WS" on the tag
means you can use
your SpotLifter.
2
Push power button to turn the unit ON.
4
To pre-treat stained or highly soiled areas,
hold the unit above soiled surface and
press the spray trigger.
6
5
Let cleaning solution set for 5
minutes before cleaning.
www.BISSELL.com
7
Advertisement
