Advertisement
Empty Dirty Water Tank
WARNING
To reduce the risk of fire, electric shock or injury, turn power OFF and disconnect plug from
electrical outlet before performing maintenance or troubleshooting.
1
Ensure the unit is OFF. Tilt unit and set
it upright on the base on a flat surface.
Simply push up on the latch located on
the top of the tank to release.
3
Rinse out the dirty tank with clean water
after emptying.
NOTICE: Do not store unit with water in the clean or dirty water tank. Ensure
both tanks are empty prior to storing the machine.
10
www.BISSELL.com
2
Carefully remove the dirty water tank
from the unit and carry to a sink. To
empty, pull tab at the end of the tank
and empty to remove the dirty water.
4
Close the tank plug
and return tank to
the unit. Ensure
the tank is secure
before use.
Advertisement
