Programming The Csb200; Proais Program - Comar Systems CSB200 Programming Manual

CSB200 Class B AIS
DISCLAIMER
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED
WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
OF SUCH DAMAGE.
This software uses components and source code developed by other
companies or groups.
Microsoft .Net Framework V2.0:
Copyright © 2005 Microsoft Corporation
ZedGraph Graphing component dll (http://zedgraph.org):
Provided under the GNU Lesser General Public License
All trademarks mentioned in this document are the property of their
respective owners.
R1.0 3
CSB200 Class B AIS

PROGRAMMING THE CSB200

proAIS Program

Before the CSB200 can transmit it requires to be programmed with your
own vessels information. This is done via the CSB200 field programmer
proAIS
Requirements
The proAIS application is designed to operate with Microsoft Windows
200, XP and above. Recommended minimum system requirements are:
•
Microsoft Windows XP SP2
•
Display resolution of at least 1024 x 768
•
At least one RS232 serial port (or USB to serial converter
already installed*)
*If you are using a USB to serial converter please ensure this is fully
installed before proceeding.
This software uses the Microsoft .Net Framework V2.0. The Framework
will be automatically installed during setup if not already present on the
system.
Setup
1. Insert the installation CD and locate the Setup.exe file.
2. Double click the Setup.exe file to begin the installation.
3. Follow on screen prompts to install the .Net Framework if
required
4. When the security warning below is displayed, select 'Install'
R1.0 4