Jackson DISHSTAR HT-E Installation, Operation And Service Manual page 17

INSTALLATION
PROGRAMMING
CHEMICAL
FEEDER PUMPS
07610-004-43-79-D
To change any other values, you will have to return to the programming mode. To
revert back to a previous setting, you must return to that option and change the
parameter back to the previous setting.
Once in the programming mode, if there have been no keypad inputs for approximately
two minutes, the system will automatically exit out of the programming mode. Any
changes to parameters will be lost when the programming mode is automatically
exited. The wash and drain cycles are not adjustable.
All time adjustments are in seconds. Refer to the chart below for adjustable outputs.
PGM
A
B
C
D
E
F
G
H
ACCEPT
®
PGM DishStar HT-E
E Not adjustable
F Rinse
G
Detergent
H Rinse-Aid
TIMER PROGRAMMING BOARD
MOVE
ENTER
INSTRUCTIONS
TIME IN SECONDS
8
4
2
1
0.8
0.4
0.2
0.1
10