Table of Contents
Advertisement
6881038B85.book Page 27 Thursday, August 30, 2001 3:07 PM
•
When you exit by pressing M , radio displays
•
To turn the Eavesdrop Reducer feature Off, press \ as needed until
displayed, then select
[
•
Then press M to exit.
Understanding Repeater Channels
If you have a GMRS repeater and wish to use it, you must set your
T7200 to repeater mode. Those channels are identified on the
display by having both x in the Interference Eliminator Code area
and
at the bottom right of the display. They are identified as
l
channels 15 x - 22 x.
To enable repeater channels on your T7200:
•
Turn your radio Off.
•
Turn your radio back On while you press and hold the
A very unique power-up chirp will sound indicating that your radio now has repeater
capability. Now you can talk to other T7200 radios that are set to your same repeater
Channel, Interference Eliminator Code, and Eavesdrop Reducer Code.
To disable repeater channels:
•
Turn your Radio Off.
•
Turn your radio back on while you press and hold the
.
e
or
until
does not appear.
e
]
M
M
is
e
x
and
for 3 seconds.
^
and
for 3 seconds.
^
27
- Quick Links:
- Diagram of Your Radio's Display
Hide quick links:
Advertisement
Table of Contents
