Manual Display - Mitsubishi Electric MELSEC-Q Series Manual

6. MANUAL DISPLAY

Manuals can be displayed using the document display function. For more details about the document display
function, please refer to the "GT Designer3 (GOT2000) Help". Please note that the document display function does
not support language switching. Therefore, in the sample screens, the language of document is switched by switching
the document (Document ID) specified for a display language.
6.1 Preparing Document Data for Manual Display
Example: Displaying a English manual (document) for Manual Display on the base screen B-30500
(1) Convert the manual (Word or Excel, etc.) to be displayed into the document data (JPEG file) that can be used
with the document display function by using Document Converter. Set the Document Converter's [Document ID]
to 201.
*For details of the relation between Document ID and Display language, please refer to the table below.
Column No. of the
comment group No
1
2
3
*Please use Document Converter 2.09k or later. The total number pages and pages switches cannot work
properly with 2.08 or older versions.
(2) The document data is generated in the 201 folder in the DOCIMG. Save the entire DOCIMG folder into the SD
card root directory without changing the folder configuration inside the DOCIMG folder.
SD card folder configuration
Note: In case the total number of pages is 100 or more.
This sample is made with the assumption that the total number of pages is up to 99 pages. If it exceeds 99 pages,
please modify the format of numerical input (the number of "#") that displays the total number of pages and the
page number of the currently displayed page.
Document Converter's
Document ID
Language
English
Japanese
Chinese (Simplified)
Document ID
201
202
203
Document ID
33/35 BCN-P5999-0176-2a