Tuning (B-30009) - Mitsubishi Electric MELSEC-Q Series Manual

5.3.9 Tuning (B-30009)

1
2
3
Outline
This is the tuning screen of servo amplifiers.
Description
1. Selects the gain adjust mode. Settable items vary depending on the selected mode.
2. Sets the load to motor inertia ratio.
3. Sets the auto tuning response.
4. Sets gain parameters.
5. Switches axes to monitor.
6. Reflects the tuning settings to the servo amplifier.
7. Switches to each screen. The blue switch indicates the currently displayed screen, thus selecting this
switch will not switch the screen.
8. Switches to the previously opened screen.
9. Displays the current date and time. Touch the area to open the [Clock Setting] window.
10. Opens the [Language Setting] window.
Remarks
 If a system alarm occurs, the alarm message will appear at the bottom of the screen. When touching the left
end of the message, the display position of the message changes in the order of upper, center, and lower.
When touching the other part of the message, the [Alarm Reset] window appears.
 Screen scripts are used to change display according to the selected tuning mode and to make tuning
settings. For more details about scripts, please refer to "5.6 Script List".
5
7
17/35
9
10
4
6
8
BCN-P5999-0176-2a