Start Up - Mars GSW1 User Manual

GSW1
4

START UP

GSW1 unit accepts a standard GSM SIM cards from any network.
VERY
USE A MICRO SIM CARD
IMPORTANT
DO NOT Insert or remove the SIM card while the unit is powered ON!!
WARNING
IMPORTANT
 Insert SIM card in GSW1 unit.
 Connect power cable to GSW1 unit (YOU MUST POWER THE GSW1 UNIT WITH THE
POWER SUPPLY IF INCLUDED. Do not power with any other power supply).
 Power up the unit.
 Wait until LED1 (Green) starts flashing. This is set in around 30 – 45 seconds.
 GSW1 unit is now ready to operate.
Before inserting SIM card to unit make sure the PIN code is
removed!!
Page 6
USER MANUAL