No.mb205)1 - JVC FS-S57 Service Manual

3.2 Front panel assembly
• Remove the metal cover and front panel assembly.
3.2.1 Removing the front assembly section
(See Fig.20)
(1) From the inside of the front panel assembly, remove the
screw U attaching the earth wire.
Reference:
When attaching the screw U, attach the earth wire with it.
(2) Remove the four screws V attaching the front assembly
section.
(3) Take out the front assembly section from the main body.
3.2.2 Removing the switch board
(See Figs.21 and 22)
• Remove the front assembly section.
(1) From the front side the front assembly section, pull out the
volume knob in the direction of the arrow. (See Fig.21.)
(2) From the inside of the front assembly section, remove the
five screws W and screw W' attaching the switch board.
(See Fig.22.)
(3) Disconnect the card wire from the connector
switch board. (See Fig.22.)
Reference:
When attaching the screw W', attach the earth wire with
it. (See Fig.22.)
(4) Take out the switch board from the front assembly section.
(See Fig.22.)
Volume knob
1-14 (No.MB205)
CN510
Front assembly section
Fig.21
V
U
Earth wire
V
Front panel assembly
on the
CN510
Earth wire
Front assembly section
Fig.20
Front assembly section
W'
W
Switch board
Fig.22
V
V
W