JVC CH-X460 Service Manual page 15

Mounting the top plate
1. Mount the upper rod on the lifter side l and set it on
the rear of the top plate, then mount the other end of
the upper rod to m.
2. Check that the five points (n, o, p, s and r) are
correctly positioned.
When mounting section s, set it so that section t of
the lifter unit is pinched by the bending section of the
top plate.
3. Secure the top plate with six fixing screws K.
o
n
Fig. 44
(See Fig.41 to 44)
Top plate
p
r
s
m
Upper rod
l
Fig. 41
K
K
Fig. 42
Expanded view of mounting s
Section t
Lifter Unit
Point r
Fig. 43
CH-X460
K
1-15