Advertisement
CH-X460
Connection of the chassis (L) assembly
and chassis (R) assembly
1.
Attach the lower rod to the chassis (R) assembly.
While shifting the rod toward the front side, mount
the rod on the lifter unit.
With the rod mounted, place the lifter unit on the
chassis (R) assembly.
2.
Combine the chassis (L) and (R) assemblies so that
the hook section j of the chassis (L) assembly is
inserted into the notch of the chassis (R) assembly
by sliding it from the front side.
3.
After engaging, secure with the two screws U.
4.
Attach the tension spring between the lifter unit and
the chassis.
Set first
(chassis side)
1-14
(See Fig.38 to 40)
Set last (lifter side)
Proper
orientation
Tension spring
Chassis (R) assembly
Lifter unit
Notch
j
Chassis (L) assembly
U
Slide to engage
U
Fig. 40
Lower Rod
Fig. 38
Attached
Fig. 39
Combine with (R) chassis
Advertisement
