Advertisement
Mounting the lifter unit
1.
Insert the shafts f of the traverse mechanism
assembly into the slide grooves g on the lifter unit.
2.
Shift the hook of the lifter unit to the edge, and shift
the sliding lever inside the side bracket unit to the
edge as well.
3.
With each hole and lever shifted to the edge, mount
the lifter unit and side bracket unit from the side.
(Check each attached section, and check that the
two shafts h of the lifter unit are correctly inserted
into the holes i of the side bracket unit.
mounting, check that the levers move together. )
4.
Turn the lifter unit upside down.
As shown in Fig. 35, slide the lever 30 mm away from
the edge, then mount the lifter bracket assembly.
(See Fig.35 to 37)
After
Lifter unit
Attach
h
M
g
Side bracket
g
i
Lifter bracket
f
Fig. 35
g
f
f
Traverse mechanism
assembly
Fig. 36
Expanded view
Fig. 37
CH-X460
1-13
Advertisement
