Toshiba MMD-AP0726HP-E Service Manual page 49

Monitoring function of wired remote controller
The following monitoring function is available if the remote controller of RBC-AMT32E is used.
Content
Enter the service monitoring mode using the remote controller to check the sensor temperature or operation status of
the remote controller, indoor unit, and outdoor unit.
1
Push and hold the
mode.
The service monitor lights up. The temperature of CODE No.
2
Push the
TEMP.
table for CODE No.
3
Push the left part of the
monitor. Monitor the sensor temperature or operation status of the indoor unit and outdoor
unit in the refrigerant line
4
Push the to
AMP Air Conditioning
TEMP.
2
FILTER
RESET
4
CL
, and for 4 seconds or longer to enter the service monitoring
button to change to CODE No. of the item to monitor. Refer to the following
UNIT LOUVER
button (left side of the button) to change to the item to
return the display to normal.
ON / OFF
TIMER SET FAN MODE
TIME SAVE VENT
TEST SET CL SWING/FIX UNIT LOUVER
1 3
– 49 –
www.ampair.co.uk | sales@ampair.co.uk
00 00 00 00 00
appears at first.