Programming; Home Screen; Programming Order; Setting Up Users - Teltonika TWCT22 User Programming Manual

6. Programming
6.1 Home Screen
The headings along the top of the home screen take you to the different stages of the program. These
stages are listed below with a brief description of what they do.
Logics – The "logic" is what makes things happen. It converts an "Event" into an "Action". (Process)
"Events" – An "Event" is the starting point of the program. When an "Event" happens then the
program can begin. (Inputs)
Actions – an "Action" is the end point of the program. When an "Event" happens, the "Logic"
processes the "Event" and triggers an "Action". (Outputs)
User – This is where you can configure which users or groups of users can trigger programs from
external communications e.g. SMS, E‐mail or Phone Call.
Settings – this is where you configure all the internal settings for the device, e.g. internal time,
analogue inputs GSM/GPRS settings, Reply Email settings and more.
Status – Tells you the current communication status, and time of the TWCT22 as well as the software
version.
System Log – This is a list of all errors or failed actions, "Events" or logics.
6.2 Programming order
First thing is to plan your program. Write down what you want to start the program (Event). Then
think of what you want the end result to be (Action). The order to program the TWCT22 is,
6.3 Setting up Users
First click on the "Users" button on the home screen, then the following screen will appear.
Click "NEW Person" then a user will appear. Click on the user name and then configure the details.
TWCT22 User Programming Manual
Users  Events  Actions  Logics
Page 8
Figure 6.3.1
Note. SMS users must start with +44... and
phone call users with 07....
2010