Timer Event - Teltonika TWCT22 User Programming Manual

6.4.4 Timer Event
The TWCT22 has a built in real‐time clock. You can set the time of the device and use that time to
trigger Timer Events. Timer Events can be set to start at any exact time/date and finish at any exact
time/date with repetition periods set by seconds, minutes, hours, days or months. You can also select
which days of the week the program is to run.
To Program a new timer event, click on "New Timer Event" then click on the new time event when it
appears in the list and configure the event. After you have configured the event click submit.
TWCT22 User Programming Manual
Figure 6.4.4.1
Figure 6.4.4.2
Page
13
The name of the event does not have any role in
the execution of the event. It is only used for
identification purposes as you may have multiple
events.
Set the exact date and time for when you want the
program to begin.
Set the exact date and time for when you want the
program to end.
Set the exact repetition period between cycles.
Set which days you would like the program to run.
2010