Teltonika TWCT22 User Programming Manual page 17

Device Settings
The device settings must be set for the device to work correctly. To configure the settings, click on the
settings button at the top of the page. Each section of the settings should be applied as you progress
through the list.
Analog Inputs
When there is no input on either of the Analog inputs on the device you should click on the "0V"
button to calibrate the inputs.
Fault Relay
This will energise the selected relay when a fault in the device is detected.
Date and Time
This is the manual way to configure the Time and Date of the device the format of the input it:
Date: YYYY/MM/DD
Time: HH/MM/SS
TWCT22 User Programming Manual
Page
17
The name of the Logic does not have any role in
the execution of the Logic. It is only used for
identification purposes as you may have
multiple actions
With this drop down menu you can select
"AND" or "OR". This relates to the Inputs.
"AND" means all selected inputs must be active
and "OR" means one or the other. To select
multiple, Hold "Ctrl" and click on the ones you
want.
Here you select which Event(s) you want to
trigger the Action in this program.
Here you select which Action(s) you want to
happen in the program.
2010