Connecting To The Network - Lux Products KONO Installation Manual

CONNECTING TO THE
4. NETWORK

Connecting to the Network

Step 4.1: After your thermostat powers up, it will guide you through the
initial system configuration. Use the knob to change options and press
the knob to confirm your selection.
First you will need to set your system type
(F) for Furnace or Boiler (HP) for Heat Pump
then then
Set the fan type to Gas Set the valve type to O or B –
(most common), Electric look at the photo of your wiring
(for systems without gas or oil), to see which you have
or Boiler (no fan)
Note: For advanced settings please visit LuxProducts.com/KONOmanual
or call LUX Technical Support.
Step 4.2: After confirming your system
settings, KONO Smart will ask if you
would like to connect to the network.
Select "ON" to begin connection or
"OFF" to connect later. If you wish to
connect, please make sure that you have downloaded the LUX Products
App to your smartphone and created an account.
Hint: If you are having trouble, please see our instructional video at
LuxProducts.com/videos
LuxProducts.com | 15