Hide thumbs Also See for CMT-U1BT:
Table of Contents

Advertisement

Specifi cations

Main unit (HCD-U1BT/Compact Disc Receiver)
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
(Th e United States model only)
With 6 ohm loads, both channels driven, from
120 – 10,000 Hz; rated 25 watts per channel
minimum RMS power, with no more than 10%
total harmonic distortion from 250 milliwatts to
rated output.
Amplifi er section
DIN power output (rated): 20 + 20 watts
(6 ohms at 1 kHz, DIN)
Continuous RMS power output (reference):
25 + 25 watts (6 ohms at 1 kHz, 10% THD)
Inputs:
AUDIO IN (stereo mini jack):
voltage 620 mV, impedance 47 kilohms
(USB) port: Type A, maximum current
500 mA
Outputs:
 (PHONES (stereo mini jack)): accepts
headphones of 8 ohms or more
SPEAKER: accepts impedance of 6 ohms
BLUETOOTH section
Communication system:
BLUETOOTH Standard version 2.0
Output:
BLUETOOTH Standard Power Class 2
Maximum communication range:
Line of sight approx. 10 m
Frequency band:
2.4 GHz band (2.4000 GHz – 2.4835 GHz)
Modulation method:
FHSS
Compatible BLUETOOTH profi les
A2DP (Advanced Audio Distribution
Profi le)
AVRCP (Audio Video Remote Control
Profi le)
Audio format:
SBC (Sub Band Codec)
1)
Th e actual range will vary depending on factors such
as obstacles between devices, magnetic fi elds around a
microwave oven, static electricity, reception sensitivity,
antenna's performance, operating system, soft ware
application, etc.
2)
BLUETOOTH standard profi les indicate the purpose
of BLUETOOTH communication between devices.
GB
30
CMT-U1BT.GB.2-683-494-61(1)
USB section
Supported bit rate
MP3 (MPEG 1 Audio Layer-3):
32 – 320 kbps, VBR
ATRAC: 48 – 352 kbps (ATRAC3 plus),
66/105/132 kbps (ATRAC3)
WMA: 48 – 192 kbps, VBR
AAC: 48 – 320 kbps
Sampling frequencies
MP3 (MPEG 1 Audio Layer-3):
32/44.1/48 kHz
ATRAC: 44.1 kHz
WMA: 44.1 kHz
AAC: 44.1 kHz
CD player section
System: Compact disc and digital audio system
Laser Diode Properties
Emission duration: continuous
Laser Output*: Less than 44.6μW
*Th is output is the value measurement at a
Frequency response: 20 Hz – 20 kHz
Tuner section
FM stereo, FM/AM superheterodyne tuner
FM tuner section:
Tuning range: 87.5 – 108.0 MHz (100 kHz step)
Antenna: FM lead antenna
Antenna terminals: 75 ohms unbalanced
Intermediate frequency: 10.7 MHz
AM tuner section:
Tuning range:
1)
530 – 1,710 kHz (with 10 kHz tuning interval)
531 – 1,710 kHz (with 9 kHz tuning interval)
Antenna: AM loop antenna, external antenna
terminal
Intermediate frequency: 450 kHz
2)
:
distance of 200mm from the objective lens
surface on the Optical Pick-up Block with 7mm
aperture.
Speake
Genera
Power r
Power c
Dimens
× 241 ×
Mass (e
Supplie
SCU35
antenna
Design
without
CMT-U

Advertisement

Table of Contents
loading

Table of Contents